90869-2 TE Connectivity, 90869-2 Datasheet - Page 5

• Manufacturer Part Number: 90869-2
• Description: Connector Accessories Hand Tool Die Set
• Manufacturer: TE Connectivity
• Type: Die Setr

Specifications of 90869-2

• (1.57) Soft-shell Commercial Pin And Socket Connectors ,tyco Electronics / Amp: ROHS COMPLIANT
• Lead Free Status / RoHS Status: RoHS Not Applicable
• Lead Free Status / RoHS Status: RoHS Not Applicable

9. VISUAL INSPECTION
The crimping dies should be inspected on a regular
basis to ensure that they have not become worn or
damaged. Inspect the crimp sections for flattened,
chipped, worn, or broken areas. If damage or
abnormal wear is evident, the tool must be replaced.
See Section 10, REPLACEMENT.
10. REPLACEMENT
Customer--replaceable parts are shown in Figure 1.
Available separately, PRO--CRIMPER III Hand
Crimping Tool Repair Kit 679221--1 includes a
replacement nut and a variety of pins, rings, screws,
and springs.
Rev D
If the dies are damaged or worn excessively, they
must be replaced.
Order the repair kit and replaceable parts through
your TE representative, or call 1--800--526--5142, or
send a facsimile of your purchase order to
1--717--986--7605, or write to:
11.REVISION SUMMARY
Revisions to this instruction sheet include:
CUSTOMER SERVICE (038--035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105--3608
S
Updated document to corporate requirements.
408- 9964
5 of 6