5536272-4 TE Connectivity, 5536272-4 Datasheet - Page 2

• Manufacturer Part Number: 5536272-4
• Description: Conn Backplane PL 100 POS 1.27mm Solder ST Thru-Hole
• Manufacturer: TE Connectivity
• Type: Backplaner

Specifications of 5536272-4

• Pitch: 1.27 mm
• Number Of Rows: 2
• Number Of Contacts: 100
• Termination Method: Solder
• Mounting: Through Hole
• Contact Plating: Gold Over Nickel
• Rohs Compliant: YES
• Product Type: Connector
• Mount Angle: Vertical
• Termination Method To Pc Board: Through Hole - Solder
• Pcb Mount Retention: Without
• Guides: Without
• Flame Retardant: Yes
• Bus Bar Material: Phosphor Bronze
• Tail Length (mm [in]): 3.18 [0.125]
• Bus Bar Mating Area Plating: Gold (30)
• Bus Bar Termination Area Plating: Matte Tin with Nickel underplated
• Number Of Positions: 100
• Signal Contact Material: Phosphor Bronze
• Signal Contact Mating Area Plating: Gold (30)
• Signal Contact Termination Area Plating: Matte Tin with Nickel underplated
• Connector Style: Plug
• Housing Material: High Temperature Thermoplastic
• Stack Height (mm [in]): 10.92 [0.430], 31.12 [1.225]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant

3.4.
3.5.
Exam ination of product.
Term ination resistance, dry circuit.
Dielectric withstanding voltage.
Insulation resistance.
Tem perature rise vs current.
Vibration, random .
Physical shock.
Rev A
Perform ance and Test Description
Product is designed to m eet electrical, m echanical and environm ental perform ance requirem ents
specified in Figure 1. All tests are perform ed at am bient environm ental conditions per Test Specification
109-1 unless otherwise specified.
Test Requirem ents and Procedures Sum m ary
Test Description
Vertical signal:
Meets requirem ents of product
drawing and Application
Specification 114-11005.
20 m illiohm s m axim um initial.
ÄR 7 m illiohm s m axim um .
Ground bus:
10 m illiohm s m axim um initial.
ÄR 4 m illiohm s m axim um .
Right angle signal:
25 m illiohm s m axim um initial.
ÄR 7 m illiohm s m axim um .
Extended M-bus signal:
40 m illiohm s m axim um initial.
ÄR 7 m illiohm s m axim um .
500 vac at sea level.
No breakdown or flashover.
5000 m egohm s m inim um .
30 C m axim um tem perature rise at
specified current.
No discontinuities greater than 1
m icrosecond.
See Note.
No discontinuities greater than 1
m icrosecond.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirem ent
Test between adjacent signal
Visual, dim ensional and functional
per applicable quality inspection
plan.
Subject m ated contacts assem bled
in housing to 50 m v open circuit at
100 m a m axim um .
See Figure 4.
TE Spec 109-6-1.
Test between adjacent signal
contacts and between signal
contacts and ground contacts of
m ated connector assem blies.
TE Spec 109-29-1.
contacts and between signal
contacts and ground contacts of
m ated connector assem blies.
TE Spec 109-28-1.
Measure tem perature rise vs
current.
See Figures 2 and 4.
TE Spec 109-45-1.
Subject vertical and right angle
connectors to 11.6 G's rm s.
See Figure 5.
TE Spec 109-21-5, Test Level D,
Duration 15 m inutes.
Subject extended M-bus connectors
to 10-500 Hz.
See Figure 5.
TE Spec 109-21-7, Test level F,
Duration 15 m inutes.
Subject m ated connectors to 50 G's
half-sine shock pulses of 11
m illiseconds duration. 3 shocks in
each direction applied along 3
m utually perpendicular planes, 18
total shocks.
See Figure 5.
TE Spec 109-26-1.
Procedure
108-1272
2 of 8