646492-1 TE Connectivity, 646492-1 Datasheet - Page 73

• Manufacturer Part Number: 646492-1
• Description: Conn Hard Metric RCP 88 POS 2mm Press Fit RA Thru-Hole
• Manufacturer: TE Connectivity
• Type: Hard Metricr
• Series: Z-PACKr

Specifications of 646492-1

• Pitch: 2 mm
• Number Of Rows: 8
• Number Of Contacts: 88
• Termination Method: Press Fit
• Mounting: Through Hole
• Contact Plating: Gold Over Nickel
• Connector Type: Hard Metric (HM)
• Row Pitch: 2mm
• Pitch Spacing: 2mm
• No. Of Contacts: 88
• Gender: Receptacle
• Contact Termination: Right Angle Press Fit
• No. Of Rows: 8
• Rohs Compliant: Yes
• Product Type: Connector
• Pcb Mounting Orientation: Right Angle
• Shield Material: Phosphor bronze
• Board Mount: Free Board
• Module Length (mm [in]): 25.00 [0.984]
• Crosstalk Version: Standard
• Amp Standard Option Number: 1
• Shield Type: Ground Return Shielding
• Shield Style: Upper
• Shielded: Yes
• Interface Type: 2mm HM
• Termination End Plating: Tin-Lead over Nickel
• Number Of Positions: 88
• Grounding Contact: Without
• Rows Loaded: A, B, C, G, H, F, E, D
• Shield Plating: Nickel
• Contact Configuration: ACTION PIN Post, Signal
• Feedthrough Post Length (mm [in]): 3.30 [0.130]
• Compactpci: Yes
• Contact Plating, Mating Area, Material: Conforms to IEC 61076-4-101 Performance Level 2
• Contact Base Material: Phosphor Bronze
• Connector Style: Receptacle
• Mating Alignment: With
• Mating Alignment Type: Multi-Purpose Center
• Housing Color: Gray
• Housing Material: Polyester GF
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant

There are two styles of
connector insertion tooling
available to suit different
production needs.
All insertion machines
can be supplied to suit
local power supply condi-
tions. The manual arbor
frame is recommended for
repair tasks.
Catalog 65911
Revised 7-05
www.tycoelectronics.com
“Flat Rock” — tools are
fitted to the connector
and as such they are
independent of insertion
machine type or
manufacturer. They are
suitable for multiple
connector insertion when
used with a high force
insertion machine.
Quick Change —
inserts are attached to
the Tyco Electronics
insertion machine.
Adapters for other
insertion machine manu-
facturers are possible.
Dimensions are in millimeters
and inches unless otherwise
specified. Values in brackets
are standard equivalents.
AMP Z-PACK 2mm HM Hard Metric
Interconnection System
Page_Head
Connector Insertion Tooling — “Flat Rock Style”
Pneumatic and Hydraulic “Flat
Rock” Seating Machines
These machines are used
with the tooling on page 75.
They allow the fitting of
multiple connectors per
cycle, up to the limit of the
machine capacity, and can
be used with a variety of
Tyco Electronics connectors.
SM-3 Machine
Part Number 814700-2
(European CE Approved)
814700-5
SM-10/20 Machine
Part Number 803880-6
Air powered bench
machine
Capacity of 26 700 N
[6000 lb] (adequate for
individual Z-PACK 2mm
HM modules)
Pressure response mode
Cycle time is approxi-
mately 4 seconds
Accommodates printed
circuit boards up to 508
[20"] wide.
Customer Manual 409-
5626
Electric hydraulically-
powered
Capacity (selectable):
178 000 N [40 000 lb] or
89 000 N [20 000 lb]
Accommodates printed
circuit boards up to 711
[28"] wide
(Continued)
reference purposes only.
Dimensions are shown for
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
SM-3
(H-Frame)
SM-10/20
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
73