5646446-1 TE Connectivity, 5646446-1 Datasheet - Page 2
![Conn Hard Metric RCP 88 POS 2mm Press Fit RA Thru-Hole](/photos/24/84/248418/3829070_sml.jpg)
5646446-1
Manufacturer Part Number
5646446-1
Description
Conn Hard Metric RCP 88 POS 2mm Press Fit RA Thru-Hole
Manufacturer
TE Connectivity
Type
Hard Metricr
Series
Z-PACKr
Specifications of 5646446-1
Pitch
2 mm
Number Of Rows
8
Number Of Contacts
88
Termination Method
Press Fit
Mounting
Through Hole
Contact Plating
Gold Over Nickel
Connector Type
Hard Metric (HM)
Row Pitch
2mm
Pitch Spacing
2mm
No. Of Contacts
88
Gender
Receptacle
Contact Termination
Right Angle Press Fit
No. Of Rows
8
Rohs Compliant
Yes
Product Type
Female
Number Of Positions / Contacts
88
Mounting Style
Through Hole
Pcb Mounting Orientation
Right Angle
Board Mount
Free Board
Module Length (mm [in])
25.00 [0.984]
Crosstalk Version
Standard
Amp Standard Option Number
1
Shielded
No
Interface Type
2mm HM
Termination End Plating
Tin over Nickel
Number Of Positions
88
Grounding Contact
Without
Rows Loaded
A, B, E, F, D, C, G, H
Contact Configuration
ACTION PIN Post, Signal
Feedthrough Post Length (mm [in])
3.30 [0.130]
Compactpci
Yes
Contact Plating, Mating Area, Material
Gold (30)
Contact Base Material
Phosphor Bronze
Connector Style
Receptacle
Mating Alignment
With
Mating Alignment Type
Multi-Purpose Center
Housing Color
Gray
Housing Material
Polyester GF
Ul Flammability Rating
UL 94V-0
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Lead Free Status / Rohs Status
Details
3.4.
3.5.
Examination of product.
Termination resistance.
Dielectric withstanding voltage.
Insulation resistance.
Vibration, sinusoidal.
Physical shock.
Rev A
Performance and Test Description
Product is designed to meet electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per IEC 512-1.
Test Requirements and Procedures Summary
Test Description
Meets requirements of product
drawing.
50 milliohms maximum initial.
∆R 5 milliohms maximum.
750 vac at sea level.
10000 megohms minimum initial.
1000 megohms minimum final.
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
IEC 512-2-1a.
Visual, dimensional and functional
per applicable quality inspection
plan.
IEC 512-2-2a.
Subject mated contacts assembled
in housing to 20 mv maximum open
circuit at 100 ma maximum.
See Figure 3.
IEC 512-2-4a, Method B.
Test between 2 groups of alternate
contacts of mated samples. Test
between first group and second
group connected to the housing or
mounting plate. Then test between
second group and first group
connected to the housing or
mounting plate.
See Figure 4.
IEC 512-2-3a, Method A.
Test between each termination
being tested and all others
connected together, and between
each termination being tested and
the housing or mounting plate of
mated samples.
IEC 512-4-6d.
Subject mated samples to 10-500-
10 Hz traversed in 6.27 minutes.
5.66 hours in each of 3 mutually
perpendicular planes.
See Figure 5.
IEC 512-4-6c.
Subject mated samples to 50 G's
half-sine shock pulses of 11
milliseconds duration. 5 shocks in
each direction applied along 3
mutually perpendicular planes, 30
total shocks.
See Figure 5.
Procedure
108-1622
2 of 10