BCM5317KQM*ERC Broadcom, BCM5317KQM*ERC Datasheet - Page 2

• Manufacturer Part Number: BCM5317KQM*ERC
• Manufacturer: Broadcom

Specifications of BCM5317KQM*ERC

• Lead Free Status / RoHS Status: Supplier Unconfirmed

The Broadcom BCM5317 device is a highly integrated solution.
It combines all the functions of a high-speed switch
system–including packet buffer, PHY transceivers, media access
controllers, address management and a non-blocking switch
fabric–into a single 0.22um CMOS device. It complies with the
IEEE 802.3, 802.3u and 802.3x specifications, including the
MAC control PAUSE frame and auto-negotiation subsections,
providing compatibility with all industry-standard Ethernet and
Fast Ethernet devices.
This device contains eight full-duplex 10BASE-T/100BASE-TX
Fast Ethernet transceivers, each of which performs all of the
physical layer interface functions for 10BASE-T Ethernet on
Category 3, 4, or 5 unshielded twisted pair (UTP) cable and
100BASE-TX Fast Ethernet on Category 5 UTP cable.
Even though this device is primarily targeted for the cost
sensitive unmanaged market, very low cost management can also
be provided utilizing the proprietary MIB Autocast™ function.
MIB Autocast encapsulates the on-chip MIB statistics and sends
Broadcom
Broadcom Corporation and/or its subsidiaries in the United States and certain other countries.
All other trademarks are the property of their respective owners.
BROADCOM CORPORATION
16215 Alton Parkway, P.O. Box 57013
Irvine, California 92619-7013
© 2003 by BROADCOM CORPORATION. All rights reserved.
5317-PB03-R-06.25.03
®
, the pulse logo, MIB Autocast
CPU Interface
MII Interface
MDI/MDIX
MDI/MDIX
MDI/MDIX
MDI/MDIX
MDI/MDIX
MDI/MDIX
MDI/MDIX
MDI/MDIX
TM
®
and Connecting everything
10/100 PHY
10/100 PHY
10/100 PHY
10/100 PHY
10/100 PHY
10/100 PHY
10/100 PHY
10/100 PHY
B C M 5 3 1 7
®
are trademarks of
SPI/CPU
Interface
MAC
MAC
MAC
MAC
MAC
MAC
MAC
MAC
MAC
O V E R V I E W
them out automatically on a predefined port (or ports) at
programmed intervals. This feature eliminates the need for a
costly CPU and simplifies the management interface.
Using this mode, the BCM5317 periodically transmits a legal
Ethernet frame on a designated port. The frames can be
intercepted by an external management probe or a dedicated
network management application, resident on any node within
the network. This function requires only a small, low-cost
microcontroller to initialize and configure the device.
The BCM5317 provides an on-chip MIB statistics register to
collect, receive, and transmit statistics for each port. Additionally
it provides direct hardware support for the EtherLike MIB,
Bridge MIB, MIB II (interfaces) and the first four groups of the
RMON MIB. All nine groups of RMON can be supported by
using additional capabilities, such as port mirroring/snooping,
together with an external microcontroller to process some MIB
attributes. The MIB registers can be accessed through the serial
management port by an external microcontroller.
256 KB Packet Buffer
Switch Fabric
& ARL Logic
DMA Interface
MIB Registers
LED Interface
Email: [e-mail]
Web: www.broadcom.com
Phone: [phone]
LEDs
FAX: [phone]