PEF22827ELV1.1 Lantiq, PEF22827ELV1.1 Datasheet - Page 126

no-image

PEF22827ELV1.1

Manufacturer Part Number
PEF22827ELV1.1
Description
Manufacturer
Lantiq
Datasheet

Specifications of PEF22827ELV1.1

Lead Free Status / RoHS Status
Supplier Unconfirmed

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PEF22827ELV1.1
Manufacturer:
INFINEON/英飞凌
Quantity:
20 000
Table 40
SMI Register and
Address (Hex)
12 (RSLTR)
In the remote side, MII configuration for speed and duplex parameters in the digital
transceiver is automatic, according to the status of the SMI registers in the remote 10/
100Base-TX PHY as follows:
1. If the ANEGEN bit (bit 12) in the BMCR register of the 10/100Base-TX is asserted,
2. Otherwise, these parameters are derived from the SPEED (bit 13) and DUPLEX
In the local side, MII configuration for speed and duplex parameters in the digital
transceiver is automatic, according to the status of the local SMI registers as follows:
1. If the ANEGEN bit (bit 12) in the local BMCR register is asserted, then the speed and
2. Otherwise, these parameters are derived from the SPEED (bit 13) and DUPLEX
7.6.10.1.2 MII Configuration for a MAC-MAC Scenario
Figure 20
Figure 20
In a MAC-MAC scenario, the MII speed and duplex parameters of the digital transceivers
at the ends are configured automatically according to the status of the attached 10/
100Base-TX PHY, as follows:
1. If the ANEGEN bit (bit 12) in the BMCR register of the attached PHY is asserted, then
Preliminary Data Sheet
Ethernet
Link
then the speed and duplex parameters are derived from the ANAR and ANLPAR
registers of the 10/100Base-TX PHY.
(bit 8) bits in the BMCR register of the 10/100Base-TX PHY.
duplex parameters are derived from the local ANAR and ANLPAR registers.
(bit 8) bits in the BMCR register.
the speed and duplex parameters are derived from the ANAR and ANLPAR registers
of the attached PHY.
Ethernet PHY
illustrates a MAC-MAC scenario.
Register
SMI
SMI Register Behavior (page 2 of 2)
MAC-MAC Scenario
s
LT (Local)
Behavior
Result Register - Data from last read operation.
MII
Configured as
VDSL Digital
Transceiver
Ethernet
MAC
VDSL
Link
126
Configured as
VDSL Digital
Transceiver
Ethernet
MAC
NT (Remote)
Operation – Digital Block
MII
Ethernet PHY
MII_config_MAC_MAC.vsd
Registers
Rev. 1.1, 2005-01-30
SMI
VDSL6100i
PEF 22827
Ethernet
Link

Related parts for PEF22827ELV1.1