UU9LFBHNP-B322 SUMIDA AMERICA COMPONENTS INC, UU9LFBHNP-B322 Datasheet - Page 4

• Manufacturer Part Number: UU9LFBHNP-B322
• Description: CHOKE COMMON MODE 3.2MH PC MNT
• Manufacturer: SUMIDA AMERICA COMPONENTS INC
• Series: UUr

Specifications of UU9LFBHNP-B322

• Inductance: 6.3mH
• Current: 360mA
• Dc Resistance (dcr): 1.700 Ohm Max
• Filter Type: Common Mode - 2 Line Array
• Package / Case: 0.650" L x 0.492" W x 0.650" H (16.50mm x 12.50mm x 16.50mm)
• Mounting Type: Through Hole
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Impedance: -
• Other names: 308-1410

４．GENERAL CHARACTERISTICS
５．NOTE
NOTE：
4-1.STORAGE TEMPERATURE RANGE
4-2.OPERATING TEMPERATURE RANGE
4-3.EXTERNAL APPEARANCE
4-4.TERMINAL STRENGTH
4-5. HEAT RESISTANCE
4-6.INSULATING RESISTANCE THE INSULATION RESISTANCE SHOULD BE OVER 500MΩ WHEN 500V DC
4-7.VIBRATION TEST
4-8.SHOCK TEST
4-9.HUMIDITY TEST
＊ THE COIL SHOULD BE HANDLED ONE BY ONE FROM THE PACKING BOX WHEN ASSEMBLED TO P.C.B. TO PREVENT
＊ CLEARANCE DISTANCE≧3.2mm.
＊ CREEPING DISTANCE≧3.2mm.
＊ LINEFILTER IS SATISFIED WITH STANDARD UL1950.
ＳＰＥＣＩＦＩＣＡＴＩＯＮ
THE WIRE BREAKING FOR THE WIRE EXPOSED TO THE AIR,AND KEEP THE COIL NOT TOUCHING THE OTHER PARTS.
VOLTAGE PROOF
INDUCTANCE DEVIATION IS WITHIN ±3.0% AFTER THE TEST WITH GUM-BLOCK
SHOULD BE FOUND IN 1 MINUTE. NO DAMAGE TO THE INSULATION SHOULD BE FOUND
AND 1 HOUR STORAGE UNDER ROOM AMBIENT CONDITIONS AFTER THE DEVICE IS WIPED
NO EXTERNAL DEFECTS CAN BE FOUND IN THE VISUAL INSPECTION.
NO DISTINGUISHED TERMINAL PEELING OFF OR WIRE BROKEN SHOULD BE FOUND
AFTER EACH OF THE TERMINAL IS APPLIED WITH STATIC PULLING FORCE OF
5.0N FOR 60±5 SECONDS.
NO DISTINGUISHED STRUCTURE AND ELECTRIC DEFECTS SHOULD BE FOUND AFTER
1.5±0.5mm HIGH BOTTOM OF ALL THE TERMINALS ARE IMMERSED IN THE
MELTED SOLDER OF 270±5℃ FOR 5±0.5 SECONDS.
TO COIL-COIL AND COIL-CORE, MEANWHILE NO STRUCTURE AND ELECTRIC DEFECTS
INDUCTANCE DEVIATION IS WITHIN ±3.0% AFTER 1 HOUR SWEEPING VIBRATION
INDUCTANCE DEVIATION IS WITHIN ±5.0% AFTER 96±4 HOURS TEST UNDER THE
CONDITION OF RELATIVE HUMIDITY OF 90∼95% AND TEMPERATURE OF 40±2℃,
AFTER AC 2000Vrms (50Hz/60Hz) IS APPLIED TO COIL-COIL AND COIL-CORE,
IN EACH THREE DIRECTIONS, NAMELY, FORWARD AND BACKWARD, UP AND DOWN,
SHOCK TESTING MACHINE, ONCE IN EACH OF THE THREE PERPENDICULAR AXIS
DIRECTIONS. THE SHOCK ACCELERATION IS 981m/s
WITH DRY CLOTH.
MEANWHILE NO STRUCTURE AND ELECTRIC DEFECTS SHOULD BE FOUND IN 1 MINUTE.
RIGHT AND LEFT. THE FREQUENCY IS 10∼55∼10Hz AND THE AMPLITUDE OF
1 MINUTE CYCLE IS 1.5mm PP.
−40℃ ∼ ＋100℃
−40℃ ∼ ＋100℃(INCLUDING SELF TEMPERATURE RISE)
２
SPEC.NO.
ＴＹＰＥ
.
Ｓ−０７４−６４１３
ＵＵ９ＬＦＢ
IS APPLIED
４/４