CKD510JB1A105S TDK Corporation, CKD510JB1A105S Datasheet - Page 11
![CAP FEEDTHRU 1UF 10V 0805](/photos/6/3/60382/ckd_series_sml.jpg)
CKD510JB1A105S
Manufacturer Part Number
CKD510JB1A105S
Description
CAP FEEDTHRU 1UF 10V 0805
Manufacturer
TDK Corporation
Series
CKDr
Datasheet
1.CKD510JB1H472S.pdf
(17 pages)
Specifications of CKD510JB1A105S
Capacitance
1.0µF
Voltage
10V
Current
2A
Dc Resistance (dcr)
12.00 mOhm Max
Package / Case
0805 (2012 Metric)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Operating Temperature
-
Other names
445-3027-2
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
CKD510JB1A105ST
Manufacturer:
TDK/东电化
Quantity:
20 000
Company:
Part Number:
CKD510JB1A105ST000N
Manufacturer:
JAE
Quantity:
29 758
• All specifications are subject to change without notice. Please read the precautions before using the product.
No.
12
*As for the initial measurement of capacitors on number 9, 10 and 11, leave capacitors at 150 —10, 0°C for 1 hour and
measure the value after leaving capacitors for 24±2h in ambient condition.
General
Specifications
Item
Life
External
appearance
Capacitance
D.F. (Class 2)
Insulation
Resistance
Resistance
for DC (R
dc
)
Performance
No mechanical damage.
200% of initial spec. max.
1,000MΩ or 50MΩ•μF min.,
whichever smaller. (As for the
capacitors of rated voltage 16, 10, 6.3V
DC, 10MΩ•μF min.)
1.0 Ω max.
Change from the value
before test
± 15%
CKD Series — Feed Through Capacitors
US Catalog // CKD Series — Low ESL Feed Through Capacitors// Version A11
Test or Inspection Method
Reflow solder the capacitor on P.C. board (shown in
Appendix 1, Appendix 3 or Appendix 5) before testing.
Voltage shall be applied at maximum operating
temperature ±2ºC for 1,000 +48, 0h.
Applied voltage is 1xRV; however some items may be
tested at higher voltage (1.2x, 1.5x or 2xRV).
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Voltage conditioning:
Voltage treats the capacitor under testing temperature
and voltage for 1 hour.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Use this measurement for initial value.