EZA-SCE470M Panasonic - ECG, EZA-SCE470M Datasheet - Page 6
![CAP ARRAY 47PF 20% SMD](/photos/6/3/60394/eza-sc_series_sml.jpg)
EZA-SCE470M
Manufacturer Part Number
EZA-SCE470M
Description
CAP ARRAY 47PF 20% SMD
Manufacturer
Panasonic - ECG
Series
EZA-SCr
Datasheet
1.EZA-SCE220M.pdf
(6 pages)
Specifications of EZA-SCE470M
Capacitance
47pF
Voltage
25V
Current
200mA
Operating Temperature
-25°C ~ 85°C
Package / Case
0.158" L x 0.083" W x 0.026" H (4.00mm x 2.10mm x 0.65mm)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Dc Resistance (dcr)
-
Other names
EZASCE470M
P10193TR
P10193TR
(1) Precautions for use
(2) Precautions for storage
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
• When using our products, no matter what sort of equipment they might be used for, be sure to make a written
• Do not use the products beyond the specifi cations described in this catalog.
• This catalog explains the quality and performance of the products as individual components. Before use, check
• Install the following systems for a failsafe design to ensure safety if these products are to be used in equip ment
✽ Systems equipped with a protection circuit and a protection device
✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a sin gle fault
• These products are designed and manufactured for general and standard use in general elec tron ic equipment
• These products are not intended for use in the following special conditions. Before using the products,
• These products generate Joule heat when energized. Carefully position these products so that their heat will
• Carefully position these products so that their temperatures will not exceed the category temperature range due
• Note that non-cleaning solder, halogen-based highly active fl ux, or water-soluble fl ux may deteriorate the
• Carefully select a fl ux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance
Safety Precautions (Common precautions for EMI Filters, Fuses, and Sensors[MR Elements])
agreement on the specifi cations with us in advance. The design and specifi cations in this catalog are subject
to change without prior notice.
and evaluate their operations when installed in your products.
where a defect in these products may cause the loss of human life or other signifi cant dam age, such as damage to
vehicles (automobile, train, vessel), traffi c lights, medical equipment, aerospace equipment, electric heating
appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment.
(e.g. AV equipment, home electric appliances, offi ce equipment, information and communication equipment)
carefully check the effects on their quality and performance, and determine whether or not they can be used.
1. In liquid, such as water, oil, chemicals, or organic solvent
2. In direct sunlight, outdoors, or in dust
3. In salty air or air with a high concentration of corrosive gas, such as Cl
4. Electric Static Discharge (ESD) Environment
5. Electromagnetic Environment
6. In an environment where these products cause dew condensation
7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with
not affect the other components.
to the effects of neighboring heat-generating components. Do not mount or place heat-generating components
or infl ammables, such as vinyl-coated wires, near these products (except Thermal Cutoffs).
performance or reliability of the products.
or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water
residues. Otherwise, the insulation performance may be deteriorated.
The performance of these products, including the solderability, is guaranteed for a year from the date of ar riv al
at your company, provided that they remain packed as they were when delivered and stored at a tem per a ture
of 5 °C to 35 °C and a relative humidity of 45 % to 85 %. (Micro Chip Fuses: Guaranteed for 6 months from the
date of arrival at your company)
The performance of EMI Filters is guaranteed for 6 months or a year from the out go ing inspection date indicated on
the packages, provided that they are stored at a temperature of -5 °C to +40 °C and a relative humidity of 40 %
to 60 %. Check the guarantee period in the specifi cations. The performance of Thermal Cut offs is guaranteed for a
year from the outgoing inspection date indicated on the packages, provided that they are stored at a temperature of
-10 °C to +40 °C and a relative humidity of 30 % to 75 %.
Even within the above guarantee periods, do not store these products in the following conditions. Otherwise,
their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping
materials) may be deformed or deteriorated, resulting in mounting failures.
1. In salty air or in air with a high concentration of corrosive gas, such as Cl
2. In direct sunlight
These components are sensitive to static electricity and can be damaged under static shock (ESD).
Please take measures to avoid any of these environments.
Smaller components are more sensitive to ESD environment.
Avoid any environment where strong electromagnetic waves exist.
resin or other materials
– EX2 –
2
, H
2
, H
2
S, NH
2
S, NH
3
, SO
3
, SO
2
, or NO
2
, or NO
2
2
Feb. 2006