LI0201C800R-10 Laird Technologies, LI0201C800R-10 Datasheet - Page 6

• Manufacturer Part Number: LI0201C800R-10
• Description: FERRITE CHIP 80OHM 300MA 0201
• Manufacturer: Laird Technologies
• Series: Stewardr

Specifications of LI0201C800R-10

• Impedance @ Frequency: 80 Ohm @ 100MHz
• Current Rating: 300mA
• Dc Resistance (dcr): 600.0 mOhm Max
• Filter Type: Differential Mode - Single
• Number Of Lines: 1
• Package / Case: 0201 (0603 Metric)
• Mounting Type: Surface Mount
• Product: Chip Ferrite Beads
• Impedance: 80 Ohms
• Maximum Dc Current: 300 mAmps
• Maximum Dc Resistance: 0.6 Ohms
• Termination Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 240-2594-2

MOISTURE SENSITIVITY
Laird Technologies’ surface mount components are not moisture sensitive as defined in IPC / JEDC J-STD-020C, as they are hermetic
devices. All surface mount components are packaged in tape & reel. Each reel is single packed in a sealed bag with sufficient desiccant
to prevent oxidation of part terminations and maintain shelf life.
SHELF LIFE
Cofire Monolithic Products are allowed twelve (12) months from date of shipment for product stored in unopened, original packaging.
Once the original packaging is opened the shelf life is reduced to three months (or the remainder of the 12 months if opened after 9
months).*
Assembled Products with wire are allowed twenty-four (24) months from date of shipment for product stored in unopened, original
packaging. Once the original packaging is opened the shelf life is reduced to six Months (or the remainder of the 24 months if opened
after 18 months).*
Ferrite Cores for cables and wiring harnesses have an unlimited shelf life. All cores are RoHS compliant.
Ferrite Disks & Plates with adhesive have twenty-four (24) months shelf life on the adhesive from date of certificate of analysis.
Ferrite Disks & Plates will be labeled at the manufacturing site to indicate expiration date of the adhesive on the disk or plate. Ferrite
Disks & Plates are RoHS compliant.
OPERATING TEMPERATURE FOR BOARD LEVEL SHIELDS
All board level part electrical specifications and tolerances are based on room temperature (23°C ± 2°C). Laird Technologies’ board level parts
have an operating temperature of -40˚C to +125˚C (unless stated otherwise). While the parts will continue to operate and not be damaged
over this range, they may not operate within the specified electrical performance tolerances during exposure to extreme temperatures.
NOTE : All Laird Technologies’ Ferrite EMI cable cores are RoHS compliant
Innovative Technology
global
USA: +1 800 634.2673
Europe: +49 8031.2460.0
Asia: +86 755.2714.1166
www.lairdtech.com
+1 423 308.1690
for a Connected World
solutions:
*Note: Board Level Cofire (monolithic) and Assembled products with wire must be stored in a non-corrosive,
temperature and humidity controlled environment. The temperature should be between –5°C and +40°C, and the
humidity between 40 and 60% RH, with no sudden changes.
local
support
TM
Ferrite Chip Beads
Application Notes
LI0201