MCP73871-2AAI/SS Microchip Technology, MCP73871-2AAI/SS Datasheet - Page 21
![no-image](/images/manufacturer_photos/0/4/439/microchip_technology_sml.jpg)
MCP73871-2AAI/SS
Manufacturer Part Number
MCP73871-2AAI/SS
Description
USB/AC Battery Charger With Power Path Management 20 SSOP .209in TUBE
Manufacturer
Microchip Technology
Datasheet
1.MCP73871-2CCIML.pdf
(32 pages)
Specifications of MCP73871-2AAI/SS
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
5.2.3
Driving the PROG2 input to a logic Low selects the low
USB port source current setting (maximum 100 mA).
Driving the PROG2 input to a logic High selects the
high USB port source current setting (Maximum
500 mA).
5.2.4
The power-good (PG) option is a pseudo open-drain
output. The PG output can sink current, but not source
current. However, there is a diode path back to the
input, and as such, the output should only be pulled up
to the input. The PG output is low whenever the input
to the MCP73871 device is above the UVLO threshold
and greater than the battery voltage. The PG output
can be used as an indication to the system that an input
source other than the battery is supplying power.
© 2008 Microchip Technology Inc.
USB PORT CURRENT
REGULATION SELECT (PROG2)
POWER-GOOD (PG)
5.2.5
The timer enable (TE) input option is used to enable or
disable the internal timer. A low signal on this pin
enables the internal timer and a high signal disables
the internal timer. The TE input can be used to disable
the timer when the charger is supplying current to
charge the battery and power the system load. The TE
input is compatible with 1.8V logic.
TIMER ENABLE (TE) OPTION
MCP73871
DS22090A-page 21