PIC16F1507T-I/SO Microchip Technology, PIC16F1507T-I/SO Datasheet - Page 28

• Manufacturer Part Number: PIC16F1507T-I/SO
• Description: 3.5KB Flash, 128B RAM, 18 I/O, CLC, CWG, DDS, 10-bit ADC 20 SOIC .300in T/R
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F1507T-I/SO

• Processor Series: PIC16
• Core: PIC16F
• Data Bus Width: 8 bit
• Program Memory Type: Flash
• Program Memory Size: 3.5 KB
• Data Ram Size: 128 B
• Interface Type: ICSP
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 18
• Number Of Timers: 3
• Operating Supply Voltage: 2.3 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: SOIC-20
• Minimum Operating Temperature: - 40 C
• Operating Temperature Range: - 40 C to + 85 C
• Supply Current (max): 30 uA
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: -
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 17
• Eeprom Size: -
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Lead Free Status / Rohs Status: Details

PIC12(L)F1501/PIC16(L)F150X
6.0
Code protection is controlled using the CP bit in
Configuration Word 1. When code protection is
enabled, all program memory locations (0000h-7FFFh)
read as ‘0’. Further programming is disabled for the
program memory (0000h-7FFFh).
The user ID locations and Configuration Words can be
programmed and read out regardless of the code
protection settings.
6.1
Code protection is enabled by programming the CP bit
in Configuration Word 1 register to ‘0’.
The only way to disable code protection is to use the
Bulk Erase Program Memory command.
DS41573C-page 28
CODE PROTECTION
Program Memory
Advance Information
7.0
In the hex file there are two bytes per program word
stored in the Intel
LSB first, MSB second. Because there are two bytes
per word, the addresses in the hex file are 2x the
address in program memory. (Example: Configuration
Word 1 is stored at 8007h on the PIC16(L)F1507. In the
hex file this will be referenced as 1000Eh-1000Fh).
7.1
To allow portability of code, it is strongly recommended
that the programmer is able to read the Configuration
Words and user ID locations from the hex file. If the
Configuration Words information was not present in the
hex file, a simple warning message may be issued.
Similarly, while saving a hex file, Configuration Words
and user ID information should be included.
7.2
If a device ID is present in the hex file at 1000Ch-
1000Dh (8006h on the part), the programmer should
verify the device ID (excluding the revision) against the
value read from the part. On a mismatch condition the
programmer should generate a warning message.
HEX FILE USAGE
Configuration Word
Device ID and Revision
®
INHX32 hex format. Data is stored
 2011 Microchip Technology Inc.