PIC16F724-E/ML Microchip Technology, PIC16F724-E/ML Datasheet - Page 17

• Manufacturer Part Number: PIC16F724-E/ML
• Description: 7KB Flash Program, 1.8V-5.5V, 16MHz Internal Oscillator, 8b ADC, CCP, I2C/SPI, A
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F724-E/ML

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 7KB (4K x 14)
• Program Memory Type: FLASH
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 14x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 44-QFN
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 192 B
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 3
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 14 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164112 - VOLTAGE LIMITER MPLAB ICD2 VPPAC164322 - MODULE SOCKET MPLAB PM3 28/44QFN444-1001 - DEMO BOARD FOR PICMICRO MCU
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

4.2.9
The Bulk Erase Program Memory command performs
two different functions, dependant on the current state
of the Program Counter (PC).
FIGURE 4-9:
4.2.10
A row of program memory consists of 32 consecutive
14-bit words. A row is addressed by the Program
Counter PC<13:5>. The Row Erase Program Memory
command can be used to erase an individual row. If the
program memory is code protected the Row Erase
Program Memory command will be ignored. When the
PC is 2000h-2008h the Row Erase Program Memory
command will only erase the user ID locations,
independent of the setting of the CP Configuration bit.
After receiving the Row Erase Program Memory
command, the erase will not complete until the time
interval, T
FIGURE 4-10:
 2010 Microchip Technology Inc.
PC 0000h-1FFFh:
PC 2000h-2008h:
Program Memory is erased
Configuration words are erased
Program Memory is erased
Configuration Words are erased
User ID Locations are erased
ERAR
BULK ERASE PROGRAM MEMORY
ROW ERASE PROGRAM MEMORY
ICSPCLK
ICSPDAT
ICSPCLK
ICSPDAT
, has expired.
BULK ERASE PROGRAM MEMORY
ROW ERASE PROGRAM MEMORY
1
1
1
1
2
2
0
0
Advance Information
3
3
0
0
4
4
1
PIC16F72X/PIC16LF72X
0
5
5
0
After receiving the Bulk Erase Program Memory
command, the erase will not complete until the time
interval, T
1
Note 1: The code protection Configuration bit
Note 2: A Bulk Erase Program Memory command
6
6
X
X
ERAB
T
(CP) has no effect on the Bulk Erase
Program Memory command.
should not be issued when the PC is
greater than 2008h.
T
ERAB
ERAR
, has expired.
Next Command
Next Command
1
1
X
X
2
2
X
X
DS41332C-page 17
3
3
X
X