PIC18F86J50T-I/PT Microchip Technology, PIC18F86J50T-I/PT Datasheet - Page 152

• Manufacturer Part Number: PIC18F86J50T-I/PT
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,TQFP,64PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F86J50T-I/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 65
• Program Memory Size: 64KB (32K x 16)
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3904 B
• Interface Type: I2C, MSSP, SPI, EUSART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 65
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM183022, DM183032
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162087 - HEADER MPLAB ICD2 18F87J50 68/84MA180021 - MODULE PLUG-IN 18F87J50 FS USBAC164328 - MODULE SKT FOR 80TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: PIC18F86J50T-I/PTTR

PIC18F87J50 FAMILY
10.6
PORTE is an 8-bit wide, bidirectional port. All pins on
PORTE are digital only and tolerate voltages up to
5.5V.
All pins on PORTE are implemented with Schmitt
Trigger input buffers. Each pin is individually
configurable as an input or output.
On 80-pin devices, PORTE is multiplexed with the
system bus as part of the external memory interface.
I/O port and other functions are only available when the
interface is disabled, by setting the EBDIS bit
(MEMCON<7>). When the interface is enabled,
PORTE is the high-order byte of the multiplexed
address/data bus (AD15:AD8). The TRISE bits are also
overridden.
Each of the PORTE pins has a weak internal pull-up. A
single control bit can turn off all the pull-ups. This is
performed by clearing bit REPU (PORTG<6>). The
weak pull-up is automatically turned off when the port
pin is configured as an output. The pull-ups are
disabled on any device Reset.
DS39775C-page 152
Note:
PORTE, TRISE and
LATE Registers
These pins are configured as digital inputs
on any device Reset.
PORTE is also multiplexed with Enhanced PWM
outputs B and C for ECCP1 and ECCP3 and outputs B,
C and D for ECCP2. For all devices, their default
assignments are on PORTE<6:3>. On 80-pin devices,
the multiplexing for the outputs of ECCP1 and ECCP3
is controlled by the ECCPMX Configuration bit.
Clearing this bit reassigns the P1B/P1C and P3B/P3C
outputs to PORTH.
For devices operating in Microcontroller mode, pin RE7
can be configured as the alternate peripheral pin for the
ECCP2 module and Enhanced PWM output 2A. This is
done by clearing the CCP2MX Configuration bit.
PORTE is also multiplexed with the Parallel Master
Port address lines. When PMPMX = 0, RE1 and RE0
are multiplexed with the control signals, PMPWR and
PMPRD.
RE3 can also be configured as the Reference Clock
Output (REFO) from the system clock. for further
details on this, refer to Section 2.5 “Reference Clock
Output”.
EXAMPLE 10-5:
CLRF
CLRF
MOVLW
MOVWF
PORTE
LATE
03h
TRISE
;
; clearing output
; data latches
; Alternate method to clear
; output data latches
;
; data direction
;
;
Initialize PORTE by
Value used to initialize
Set RE<1:0> as inputs
RE<7:2> as outputs
INITIALIZING PORTE
© 2009 Microchip Technology Inc.