PIC24HJ128GP510A-I/PT Microchip Technology, PIC24HJ128GP510A-I/PT Datasheet - Page 155

• Manufacturer Part Number: PIC24HJ128GP510A-I/PT
• Description: 16 Bit MCU 128KB FLASH 100 TQFP 12x12x1mm TRAY
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ128GP510A-I/PT

• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 128KB (43K x 24)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 32x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFQFP
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 7.37 MHz
• Number Of Programmable I/os: 85
• Number Of Timers: 13
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 32 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARD
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

14.0
The input capture module is useful in applications
requiring frequency (period) and pulse measurement.
The
support up to eight input capture channels.
The input capture module captures the 16-bit value of
the selected Time Base register when an event occurs
at the ICx pin. The events that cause a capture event
are listed below in three categories:
1.
FIGURE 14-1:
 2009 Microchip Technology Inc.
Note 1: This data sheet summarizes the features
Note: An ‘x’ in a signal, register or bit name denotes the number of the capture channel.
ICx Pin
Simple Capture Event modes
-Capture timer value on every falling edge of
-Capture timer value on every rising edge of
input at ICx pin
input at ICx pin
PIC24HJXXXGPX06A/X08A/X10A
2: Some registers and associated bits
INPUT CAPTURE
of the PIC24HJXXXGPX06A/X08A/X10A
family of devices. However, it is not
intended to be a comprehensive refer-
ence source. To complement the informa-
tion in this data sheet, refer to the
“dsPIC33F/PIC24H Family Reference
Manual”, Section 12. “Input Capture”
(DS70248), which is available from the
Microchip website (www.microchip.com).
described in this section may not be avail-
able on all devices. Refer to Section 4.0
“Memory Organization” in this data
sheet for device-specific register and bit
information.
Prescaler
(1, 4, 16)
Counter
3
INPUT CAPTURE BLOCK DIAGRAM
System Bus
ICxCON
ICM<2:0> (ICxCON<2:0>)
ICOV, ICBNE (ICxCON<4:3>)
Mode Select
PIC24HJXXXGPX06A/X08A/X10A
Edge Detection Logic
Clock Synchronizer
ICxI<1:0>
and
devices
Preliminary
(in IFSn Register)
Set Flag ICxIF
Interrupt
Logic
2.
3.
Each input capture channel can select between one of
two 16-bit timers (Timer2 or Timer3) for the time base.
The selected timer can use either an internal or exter-
nal clock.
Other operational features include:
• Device wake-up from capture pin during CPU
• Interrupt on input capture event
• 4-word FIFO buffer for capture values
• Input capture can also be used to provide
Sleep and Idle modes
- Interrupt optionally generated after 1, 2, 3 or
additional sources of external interrupts.
Note:
-Capture timer value on every 4th rising edge
-Capture timer value on every 16th rising
Capture timer value on every edge (rising and
falling)
Prescaler Capture Event modes
4 buffer locations are filled
of input at ICx pin
edge of input at ICx pin
Logic
FIFO
R/W
Only IC1 and IC2 can trigger a DMA data
transfer. If DMA data transfers are
required, the FIFO buffer size must be set
to 1 (ICI<1:0> = 00).
From 16-bit Timers
TMRy TMRz
1
ICxBUF
16
0
DS70592B-page 155
16
ICTMR
(ICxCON<7>)