S29GL128P90TFIR13 Spansion Inc., S29GL128P90TFIR13 Datasheet - Page 31

• Manufacturer Part Number: S29GL128P90TFIR13
• Description: IC 128M PAGE-MODE FLASH MEMORY
• Manufacturer: Spansion Inc.

Specifications of S29GL128P90TFIR13

• Cell Type: NOR
• Density: 128Mb
• Access Time (max): 90ns
• Interface Type: Parallel
• Boot Type: Not Required
• Address Bus: 24/23Bit
• Operating Supply Voltage (typ): 3/3.3V
• Operating Temp Range: -40C to 85C
• Package Type: TSOP
• Sync/async: Asynchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 3V
• Operating Supply Voltage (max): 3.6V
• Word Size: 8/16Bit
• Number Of Words: 16M/8M
• Supply Current: 110mA
• Mounting: Surface Mount
• Pin Count: 56
• Lead Free Status / Rohs Status: Compliant

Notes
1. See
2. See
November 17, 2010 S29GL-P_00_A13
No
Table 12.1 on page 69
DQ3: Sector Erase Timeout State Indicator on page 39
PASS. Device returns
to reading array.
DQ3 = 1?
Yes
Poll DQ3.
Yes
No
for erase command sequence.
Write Sector Erase Cycles:
Sector Address, Data 30h
Address 555h, Data AAh
Address 2AAh, Data 55h
Address 555h, Data AAh
Address 555h, Data 80h
Address 2AAh, Data 55h
Perform Write Operation
Write Unlock Cycles:
Sector Addresses
(see
Write Additional
Status Algorithm
Additional
DQ5 = 1?
Sectors?
Figure
Yes
Done?
Select
Yes
No
Yes
7.4)
D a t a
FAIL. Write reset command
Last Sector
Selected?
to return to reading array.
S29GL-P MirrorBit
No
for information on the sector erase timeout.
No
S h e e t
Figure 7.3 Sector Erase Operation
®
Flash Family
• Each additional cycle must be written within t
• The host system may monitor DQ3 or wait t
• No limit on number of sectors
• Commands other than Erase Suspend or selecting additional
Unlock Cycle 1
Unlock Cycle 2
Command Cycle 1
Command Cycle 2
Command Cycle 3
Specify first sector for erasure
Status may be obtained by reading DQ7, DQ6 and/or DQ2.
Error condition (Exceeded Timing Limits)
acceptance of erase commands
sectors for erasure during timeout reset device to reading array
data
SEA
SEA
to ensure
timeout
31