SERDESUB-16USB/NOPB National Semiconductor, SERDESUB-16USB/NOPB Datasheet - Page 7

• Manufacturer Part Number: SERDESUB-16USB/NOPB
• Description: EVAL BOARD FOR DS90UB901/2
• Manufacturer: National Semiconductor
• Series: -r

Specifications of SERDESUB-16USB/NOPB

• Main Purpose: Interface, Serializer, Deserializer (SERDES)
• Embedded: No
• Utilized Ic / Part: DS90UB901Q
• Primary Attributes: Bidirectional Control with I2C Support
• Secondary Attributes: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PASS
FPD-LINK III INTERFACE
RIN+
RIN-
POWER AND GROUND
VDDSSCG
VDDIO1/2/3
VDDD
VDDR
VDDCML
VDDPLL
VSS
Pin Name
25, 16, 8
Pin No.
DAP
31
35
36
13
30
34
38
4
Power, Analog Rx Analog Power, 1.8V ±5%
Power, Analog Bidirectional Channel Driver Power, 1.8V ±5%
Power, Analog PLL Power, 1.8V ±5%
Power, Digital
Power, Digital
Power, Digital
Ground, DAP
Input/Output,
Input/Output,
I/O, Type
LVCOMS
Output,
CML
CML
PASS Output Pin for BIST mode.
PASS = H, ERROR FREE Transmission
PASS = L, one or more errors were detected in the received payload.
Leave Open if unused. Route to test point (pad) recommended.
Noninverting differential input, bidirectional control channel output. The
interconnect must be AC Coupled with a 100 nF capacitor.
Inverting differential input, bidirectional control channel output. The interconnect
must be AC Coupled with a 100 nF capacitor.
SSCG Power, 1.8V ±5%
Power supply must be connected regardless if SSCG function is in operation.
LVTTL I/O Buffer Power, The single-ended outputs and control input are powered
from V
Digital Core Power, 1.8V ±5%
DAP must be grounded. DAP is the large metal contact at the bottom side, located
at the center of the LLP package. Connected to the ground plane (GND) with at
least 16 vias.
DDIO
. V
DDIO
7
can be connected to a 1.8V ±5% or 3.3V ±10%
Description
www.national.com