H3DK-M2 AC/DC24-240 Omron, H3DK-M2 AC/DC24-240 Datasheet - Page 7

• Manufacturer Part Number: H3DK-M2 AC/DC24-240
• Description: TIMER, MULTIFUNCTION, 5A, 24-240AC/DC
• Manufacturer: Omron

Specifications of H3DK-M2 AC/DC24-240

• Contact Configuration: DPDT
• Delay Time Range: 0.1s To 1200h
• Relay Mounting: DIN Rail
• Svhc: No SVHC (15-Dec-2010)
• Adjustment Type: Screwdriver Slot
• Contact Current Ac Max: 5A
• Contact Current Dc: RoHS Compliant
• Supply Voltage Range: 24VAC To 240VAC / 24VDC To 240VDC
• Time Range: 0.1sec To 1200hr
• Rohs Compliant: Yes

Nomenclature
H3DK-M2
H3DK-S2
Time range switch
Output indicator (orange)
(Lit while Timer gives output.)
Operation/power indicator (green)
(Lit while the power is ON.)
Operating mode switch
INIT/TIME switch for relay R2
(Default setting is for time-limit
output.)*
*If the switch is left between settings, proper operation may not be possible.
Note: The default settings are for 0.1 s in mode A.
H3DK-M1
Time range switch
Output indicator (orange)
(Lit while Timer gives output.)
Operation/power indicator (green)
(Lit while the power is ON.)
Operating mode switch
*If the switch is left between settings, proper operation may not be possible.
Note: The default settings are for 0.1 s in mode A.
Make sure that the switch is set properly.
Make sure that the switch is set properly.
Front View
Front View
User label
attachment location
Main dial (for
setting the time)
User label attachment
location
Main dial
(for setting the time)
Terminal Block
(See notes 1 and 2.)
H3DK-S1
Time range switch*
Output indicator (orange)
(Lit while Timer gives output.)
Operation/power indicator (green)
(Lit while the power is ON.)
Operating mode switch*
*If the switch is left between settings, proper operation may not be possible.
Note: The default settings are for 0.1 s in mode A.
Make sure that the switch is set properly.
Bottom View
Note 1. Use solid wire (2.5 mm
Note 2. Screw Tightening Torque
Front View
Using Solid Wire
(2.5 mm
rules with insulative sleeves to connect
to the terminals.
To maintain the withstand voltage after
connecting the terminals, insert no
more than 8 mm of exposed conductor
into the terminal.
Recommended Ferrules
Phoenix Contact
• AI@@@ Series
• AI-TWIN@@@ Series
Recommended torque: 0.49 N·m
Maximum torque: 0.98 N·m
H3DK-M/H3DK-S
2
Max.)
8 mm max.
Main dial
(for setting the time)
Using Ferrule with
Insulative Sleeve
User label attachment
location
2
max.) or fer-
8 mm max.
7