B3W-9010-HG1N Omron, B3W-9010-HG1N Datasheet - Page 8
![Manual Switch](/photos/17/78/177838/b3w_9t1_sml.jpg)
B3W-9010-HG1N
Manufacturer Part Number
B3W-9010-HG1N
Description
Manual Switch
Manufacturer
Omron
Series
B3W-9r
Specifications of B3W-9010-HG1N
Circuit
SPST-NO
Switch Function
Off-Mom
Contact Rating @ Voltage
0.05A @ 24VDC
Actuator Type
Square Button
Mounting Type
Through Hole
Orientation
Vertical
Outline
12.00mm x 12.00mm
Illumination
Illuminated
Operating Force
160gf
Actuator
Square, Illuminated
Contact Form
SPST - NO
Body Size
12 mm L x 11 mm H
Color
White
Operating Temperature Range
- 25 C to + 70 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
B3W9010HG1N
Removing the Cap - Text Film Installation
Placing the Cap on the Switch
Hold the Cap at the side away from the mating section. Push straight
down until the mating section meets.
Removing the Cap
The Cap can be removed up to two times. Excessively removing the
Cap will cause the mating section to become weak, resulting the
operating section not mating completely or the Cap may fall off.
Film Dimensions
Dimensions of the film are shown below. The thickness is 0.2 mm.
264
1. Hold the cap at the side away from the mating section. Pull
2. Do not remove the cap while the Switch is mounted. Doing so
straight up.
will apply force to the soldered section and LEDs, resulting in
malfunction.
Illuminated Tactile Switches
Correct
Correct
7.4±0.1
7.4±0.1
Incorrect
Incorrect
8.9±0.1
8.9±0.1
B3W-9
Dust Protection
Although the switching mechanism is a sealed structure (IP64), illu-
mination part and actuation part is not sealed. Ensure you have the
correct environmental conditions for installation. Use a protective
sheet or take other measures to protect against dust.
Sensitivity to Static Electricity
Switches with high-brightness green (HG) or blue (B) LEDs are sus-
ceptible to static electricity. Take care when handling switches with
these LEDs as the LEDs may be damaged.
Storage Precautions
Storage Environment
To prevent degradation, such as discoloration, of the terminals during
storage, do not store the Switch in locations that are subject to the
following conditions.
Storage condition
Store the Switches in the packaging box.
After the packaging box is opened, use the contents as quickly as
possible. When storing leftover parts, make sure that appropriate
measures are taken against humidity and corrosive gases.
Agreement of Product Use
Comply with the usage, storage, and disposal conditions specified by
OMRON as outlined in the precautions in the product datasheet and
specifications.
Be sure to read the precautions common to all Tactile Switches, con-
tained in the Technical User’s Guide, “Tactile Switches, Technical
Information” for correct use
1. High temperature or humidity
2. Corrosive gases
3. Direct sunlight