XS5W-T421-CMC-K Omron, XS5W-T421-CMC-K Datasheet - Page 6
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
XS5W-T421-CMC-K
Manufacturer Part Number
XS5W-T421-CMC-K
Description
Ethernet Connector
Manufacturer
Omron
Datasheet
1.XS5H-T421-BM0-K.pdf
(8 pages)
Precautions
■ Correct Use
Do not use the Connectors in an atmosphere or environment that
exceeds the specifications.
Connector Connection and Disconnection
Wiring
Degree of Protection
6
• When connecting or disconnecting Connectors, be sure to hold the
• Do not hold the cable when disconnecting Connectors.
• When mating Connectors, be sure to insert the plug all the way to
• Do not use tools of any sort to mate the Connectors. Always use
• Lay the cables so that external force is not applied to the
• The degree of protection of Connectors (IP67) is not for a fully
• Do not step on or place any objects on the Connectors. Doing so
Connectors by hand.
the back of the socket before attempting to lock the Connectors.
your hands. Pliers or other tools may damage the Connectors.
Connectors. Otherwise, the degree of protection (IP67) may not
be achieved.
watertight structure. Do not the Connectors underwater.
may damage the Connectors.
Industrial Ethernet Connectors
XS5@-T / XS6@-T
■ General Precautions
• Do not pull excessively on the Connectors or cables. Do not install
• Install the Connectors and cables where they will not be stepped
• Refer to the specifications for your cables before bending the
the Connectors or cables in any way that would place a load
directly on the mating section or cable connections. Doing so can
damage the Connectors or break the wires inside the cables.
on to prevent the wires inside the cables from being broken and to
prevent the Connectors from being damaged. If the Connectors or
cables must be installed where they might be stepped on, protect
them with covers.
cables and do not bend them past their minimum bending radius.