XW3D-P852-G11 Omron, XW3D-P852-G11 Datasheet - Page 4
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
XW3D-P852-G11
Manufacturer Part Number
XW3D-P852-G11
Description
Connector Terminal Box
Manufacturer
Omron
Datasheet
1.XW3D-P452-G11.pdf
(6 pages)
Specifications of XW3D-P852-G11
Lead Free Status / RoHS Status
Models with Two I/O and One Port
Note: Colors given in the connection diagram are lead colors.
■ Mounting Dimensions
Note: Mounting dimensions are the same for any models.
Safety Precautions
Do not use the Connectors in an atmosphere or environment that
exceeds the specifications.
Connector Connection and Disconnection
• Mate the connectors according to the procedure given in this datasheet.
• When joining Connectors, be sure to insert the plug all the way to
• Do not use tools of any sort to mate the Connectors. Always use
• When mating the Connectors to XS2 or other screw on M12 Con-
• Confirm in the catalog that sensors and actuators are applicable
• Always turn OFF the power supply before connecting or discon-
• Do not touch the mating surface of the connectors with wet hands.
• Wipe away any water around the connectors.
• Do not allow metal scraps or dust to enter the mating section.
180
XW3D-P458-G11
for 3-Wire DC NPN and Actuator (1-4 or 1-2)
Signal 1B
(Pink)
Signal 1A
(White)
Signal 2B
(Red)
Signal 2A
(Green)
Signal 3B
(Black)
Signal 3A
(Yellow)
Signal 4B
(Purple)
Signal 4A
(Gray)
the back of the socket before attempting to lock the Connectors.
your hands. Pliers or other tools may damage the Connectors.
nectors, tighten the lock by hand to a torque of 0.39 to 0.49 N·m.
before using them.
necting connectors.
Lead color
power supply
Positive
(Brown)
1
1
2
2
3
3
4
4
Connector Terminal Boxes (M12)
73
power supply
Precautions for Correct Use
±0.1
Negative
(Blue)
4
4
4
4
1
5
3
1
5
3
1
5
3
1
5
3
Three, M4 or 4.5 dia.
2
2
2
2
Connector
pin number
33
±0.1
Ground
(Green/
Yellow)
3-WIRE
NPN (2)
XW3D
Cable Lead Polarity
• Connect the cables leads using the correct polarity (Blue: Negative
• If the polarity is not correct, the load may not operate or the
• Always connect a load to the signal lines to operate a sensor or
Applicable Connectors
• Always mount a Waterproof Cover (XS2Z-22) or Dust Cover (XS2Z-15)
Power Supply and Operation Indicators
• The power supply indicator will be lit green while power is being
• The XW3D is for a DC sensor or actuator. Do not use it for an AC
• Connector Terminal Boxes are available with either 2-wire or
XW3D-P457-G11
for 3-Wire PNP and Actuator (3-4 or 3-2)
Signal 1B
(Pink)
Signal 1A
(White)
Signal 2B
(Red)
Signal 2A
(Green)
Signal 3B
(Black)
Signal 3A
(Yellow)
Signal 4B
(Purple)
Signal 4A
(Gray)
power supply, Brown: Positive power supply).
operation indicator may not light.
actuator.
to any unused connector on the Connector Terminal Box.
supplied. The operation indicator will be lit red while the sensor or
actuator is operating.
sensor or actuator.
3-wire internal connections, as indicated on the case.
Lead color
power supply
Positive
(Brown)
3-WIRE
NPN
1
1
2
2
3
3
4
4
power supply
Negative
2-WIRE
(Blue)
4
4
4
4
1
5
3
1
5
3
1
5
3
1
5
3
3-WIRE
PNP
Connector
pin number
2
2
2
2
Ground
(Green/
Yellow)
3-WIRE
NPN (2)
3-WIRE
PNP (2)
3-WIRE
PNP (2)
(Unit: mm)