TEF6901AH/V2-T NXP Semiconductors, TEF6901AH/V2-T Datasheet - Page 28
![no-image](/images/manufacturer_photos/0/4/487/nxp_semiconductors_sml.jpg)
TEF6901AH/V2-T
Manufacturer Part Number
TEF6901AH/V2-T
Description
Tuners TUNER ASP ONECHIP
Manufacturer
NXP Semiconductors
Datasheet
1.TEF6901AHV2-T.pdf
(107 pages)
Specifications of TEF6901AH/V2-T
Mounting Style
SMD/SMT
Package / Case
PQFP-64
Minimum Operating Temperature
- 40 C
Maximum Operating Temperature
+ 85 C
Lead Free Status / RoHS Status
Compliant
Other names
TEF6901AH/V2,518
NXP Semiconductors
TEF6901A_3
Product data sheet
Table 25.
Since buffer mode (bits MODE[2:0] = 000) does not change any tuner action or register
other then those defined by the I
for writing outside the buffered subaddress range (i.e. bits SA[4:0] = 06h to 1Fh). Writing
in the subaddress range of 06h to 1Fh is executed immediately and is not controlled by
the state machine. Load mode does not interrupt a state machine process, the preload
action changes the content of the BUFFER register which may interfere with a tuner
action in progress.
When a new state machine tuning action is started during a mute state of the state
machine, the new action skips the unnecessary activation of mute and starts immediately
with the actions that follow the mute period in the standard sequence. In this way fastest
timing is possible e.g. for search tuning (see
Figure
action will be performed; in combination with check mode an AF update can be created
with the AF sampling time defined by I
The FM IF2 signal path contains a digital controlled AGC function with a maximum AGC
decay time of 13 ms to realize sufficient AM suppression during changing signal
conditions and high modulation situations. During the settling of the AGC (e.g. after a
tuning action), the gain of the FM path and the level detection can be affected. To get
correct signal quality information, a minimum time of 13 ms should be used between two
tuning actions.
MODE2 MODE1 MODE0 Symbol
0
0
0
0
1
1
1
1
22). When AF update mode is started during a mute state only the return tuning
Tuning action modes
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
Rev. 03 — 20 March 2008
buffer
preset
search
AF update tune to AF program; check AF quality and tune back to
jump
check
load
end
2
C-bus write transmission it generally is the mode used
Description
write BUFFER register, no state machine action, no
register swap; see
tune to new program with 60 ms mute control; swap;
see
CONTROL register; immediate swap; see
tune to new program and stay muted (to release use
end); swap; see
preloaded with CONTROL register; see
main program; two register swap operations;
see
tune to AF program in minimum time; register swap;
see
tune to AF program and stay muted (to release use end);
register swap; see
write CONTROL register via BUFFER; no state machine
action; BUFFER is preloaded with CONTROL register;
immediate swap; see
end action; release mute; no register swap; see
and
2
C-bus control (see
Figure 13
Figure
Figure
Figure 23
Figure
10,
10,
and
Figure 17
Figure 19
14,
Figure 15
Figure
Figure 9
Figure
Figure
Figure 12
Figure
and
and
14; BUFFER is preloaded with
10,
and
16,
Figure 18
Figure 20
Figure 21
18).
Figure
Figure 20
TEF6901A
Integrated car radio
© NXP B.V. 2008. All rights reserved.
16; BUFFER is
and
Figure 11
Figure 11
and
Figure 22
Figure 9
28 of 107