FN2410-16-44 Schaffner EMC Inc, FN2410-16-44 Datasheet

FILTER EMC/RFI CHASSIS MNT 16A

FN2410-16-44

Manufacturer Part Number
FN2410-16-44
Description
FILTER EMC/RFI CHASSIS MNT 16A
Manufacturer
Schaffner EMC Inc
Series
FN 2410r
Type
Filterr
Datasheet

Specifications of FN2410-16-44

Termination Style
Terminal Block
Filter Type
Power Line
Voltage - Rated
250V
Current
16A
Mounting Type
Chassis Mount
Voltage Rating
230 VAC
Current Rating
16 A
Mounting Style
DIN Rail
Frequency
50 Hz
Leakage Current
3.4 mA
Brand/series
FN 2410 Series
Current, Leakage
3.4 mA
Current, Rating
16 A
Dimensions
62 H × 93 W × 130 L mm
Frequency, Operating
DC to 400 Hz
Hipot Rating, Line To Ground
2000
Hipot Rating, Line To Line
1100
Ip Rating
IP20
Phase
1
Primary Type
AC, Industrial
Schaffner Part Number
800-173
Voltage, Operating
250 VAC
Voltage, Rating
250 VAC
Wire Size
8 AWG
Design Corresponding To
UL1283, CSA22.2 No. 8 1986, EN 133'200
High Potential Test Voltage
P → E 2000VAC for 2 Seconds
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Inductance
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
800-173
817-1351
FN2410 - 16-44

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
FN2410-16-44
Manufacturer:
Schaffner EMC Inc
Quantity:
135
Technical specifications
Maximum continuous operating voltage:
Operating frequency:
Rated currents:
High potential test voltage:
Protection category:
Overload capability:
Temperature range (operation and storage):
Flammability corresponding to:
Design corresponding to:
MTBF @ 50°C/250V (Mil-HB-217F):
MTBF @ 50°C/520V (Mil-HB-217F):
Features and benefits
Single and two-phase EMC/RFI fi lters
for industrial electronics
FN 2410 filters up to 100A are designed for
traditional chassis mounting.
For extra fast installation, FN 2412 filters
up to 45A can comfortably be snapped-in
on popular TS 35 DIN-rails which are
common in most electrical cabinets.
Both FN 2410 and FN 2412 are also avail-
able as „H versions“. These are ideally
suitable for an operation on two phases in
a three-phase power network, handling
voltages up to 520VAC.
1x 250VAC (FN 2410 / FN 2412)
2x 520/300VAC (FN 2410H / FN 2412H)
dc to 400Hz (except FN 2410H-60/-80/-100: 250Hz)
8 to 100A @ 50°C (FN 2410)
8 to 45A @ 50°C (FN 2412)
P –> E 2000VAC for 2 sec
P –> N 1100VDC for 2 sec
P –> E 2700VDC for 2 sec (H types)
P –> P 2250VDC for 2 sec (H types)
IP20
4x rated current at switch on,
1.5x rated current for 1 minute, once per hour
-25°C to +100°C (25/100/21)
UL 94V-2 or better
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
1,200,000 hours
250,000 hours (H types)
Excellent filter performance for appli-
cations with high interference levels
Filters for two-phase supply up to
2x 520VAC (P - P) available
Fast and comfortable snap-in installation
on popular TS 35 DIN-rails up to 45A
Industrial grade terminal blocks for
unsurpassed electrical safety
All filters provide an exceptional conducted
attenuation performance, based on chokes
with high saturation resistance and excellent
thermal behavior. Thus, all filters retain
the expected filter performance even in
very noisy applications and under full load
conditions.
Touch-safe industrial grade terminal
blocks provide maximum electrical safety
and protect humans from undeliberate
contact with life conductors. They help to
fulfill the most demanding installation
standards.
1-phase fi lters
FN 2410 / FN 2412
Approvals
Typical electrical schematic
P
PE
N
Typical applications
Line
Small to medium-sized machines and
industrial equipment
High-end single-phase power supplies
Single-phase variable speed motor drives,
inverters and converters
DIN-rail filter versions are ideal for panel
building and electrical cabinets
Various noisy applications with higher
power single-phase or two-phase supply
Cx
2xL
Cx
R
2xCy
Load
P‘
PE
N‘

Related parts for FN2410-16-44

FN2410-16-44 Summary of contents

Page 1

... Temperature range (operation and storage): Flammability corresponding to: Design corresponding to: MTBF @ 50°C/250V (Mil-HB-217F): MTBF @ 50°C/520V (Mil-HB-217F): Features and benefits FN 2410 filters up to 100A are designed for ■ traditional chassis mounting. For extra fast installation, FN 2412 filters ■ 45A can comfortably be snapped-in on popular TS 35 DIN-rails which are common in most electrical cabinets ...

Page 2

Components > FN 2410 / FN 2412 Filter selection table Filter Rated current @ 50°C (40°C) [A] FN 2410-8-44 8 (8.8) FN 2410-16-44 16 (17.5) FN 2410-25-33 25 (27.4) FN 2410-32-33 32 (35.0) FN 2410-45-33 45 (49.3) FN 2410-60-34 ...

Page 3

Components > FN 2410 / FN 2412 Mechanical data FN 2410( Dimensions FN 2410 8A 16A 25A A 130 130 130 108 ...

Related keywords