BOXD945GCZL Intel (CPU), BOXD945GCZL Datasheet - Page 40

• Manufacturer Part Number: BOXD945GCZL
• Manufacturer: Intel (CPU)

Specifications of BOXD945GCZL

• Lead Free Status / RoHS Status: Supplier Unconfirmed

Intel Desktop Board D945GCZ Technical Product Specification
1.13.1.3
1.13.2 Hardware Support
40
Table 9 lists the devices or specific events that can wake the computer from specific states.
Table 9.
Note:
The use of these wake-up events from an ACPI state requires an operating system that provides full
ACPI support. In addition, software, drivers, and peripherals must fully support ACPI wake
events.
CAUTION
Ensure that the power supply provides adequate +5 V standby current if LAN wake capabilities and
Instantly Available PC technology features are used. Failure to do so can damage the power
supply. The total amount of standby current required depends on the wake devices supported and
manufacturing options.
The board provides several power management hardware features, including:
•
•
•
•
•
•
•
•
•
LAN wake capabilities and Instantly Available PC technology require power from the +5 V
standby line.
These devices/events can wake up the computer…
LAN
Modem (back panel Serial Port A)
PME# signal
Power switch
PS/2 devices
RTC alarm
USB
WAKE# signal
NOTE
Power connector
Fan connectors
LAN wake capabilities
Instantly Available PC technology
Resume on Ring
Wake from USB
Wake from PS/2 keyboard
PME# signal wake-up support
WAKE# signal wake-up support
Wake-up Devices and Events
For LAN and PME# signal, S5 is disabled by default in the BIOS Setup program. Setting this option to Power On
will enable a wake-up event from LAN in the S5 state.
Wake-up Devices and Events
…from this state
S1, S3, S4, S5
S1, S3
S1, S3, S4, S5
S1, S3, S4, S5
S1, S3
S1, S3, S4, S5
S1, S3
S1, S3, S4, S5
(Note)
(Note)