Z4S264C STEC, Z4S264C Datasheet - Page 26

no-image

Z4S264C

Manufacturer Part Number
Z4S264C
Description
Manufacturer
STEC
Type
Solid State Driver
Datasheet

Specifications of Z4S264C

Density
64GByte
Operating Supply Voltage (typ)
5V
Operating Temperature (min)
0C
Operating Temperature (max)
70C
Package Type
Not Required
Mounting
Screw
Operating Temperature Classification
Commercial
Operating Supply Voltage (min)
4.75V
Operating Supply Voltage (max)
5.25V
Programmable
Yes
Lead Free Status / RoHS Status
Not Compliant
P
D
RODUCT
ESCRIPTION
General Description
The Zeus 2.5-inch Serial ATA (SATA) Solid State Drive (SSD) is a non-volatile mass storage device.
The SSD is a replacement for a standard ATA-compliant hard disk drive (HDD). No additional device
drivers are required, and the drive can be configured as a boot or data storage device.
SATA Interface
The SSD can be installed in any operating system environment that supports SATA 1.0 or greater
devices. The drive is compliant with SATA 2 standards. The SSD supports all ATA and ATAPI
devices. The SSD has a standard Serial ATA interface that is fully ATA/ATAPI-8 compliant and
conforms to the same mechanical and mounting requirements as a standard rotating disk drive.
Drive Capacities
The SSDs are available with unformatted memory capacities of 8, 12, 16, 24, 32, 48, 64, 96 and 128
gigabytes. The memory is comprised of NAND Single-Level Cell (SLC) EEPROM flash components.
In addition, the SSDs are configured with a cache buffer of 64 megabytes.
Performance
Zeus SATA SSDs can operate at sustained read/write transfer rates of up to 55 megabytes per
second. Power consumption is kept to a minimum; SSDs can be powered from a single 5-volt source.
The solid state design eliminates electromechanical noise and delay inherent in traditional magnetic
rotating media. The wear-leveling and bad-block mapping algorithms ensure consistency, accuracy,
and integrity of user data. The non-recoverable error rate of Zeus SATA SSDs is less than 1 error per
10
bits read.
20
Data Security
The SSD offers optional data sanitization (purge) features that can be customized by the user.
Supporting both sanitized erase/fill and non-recoverable sanitization options, The SSDs can be
configured to remove data from the drive, freeing storage space for later reuse, or to remove data
and destroy the storage media, making the SSD unusable and data retrieval impossible. The data
security features comply with Department of Defense (DoD) and US military data security standards,
including AFSSI 5020, AR 380-19, NAVSO P-5239-26, NISPOM DoD 5220.22-M and NSA 130-2.
8
Zeus 2.5-Inch Serial ATA Solid State Drive

Related parts for Z4S264C