V23818-M15-B57 Infineon Technologies, V23818-M15-B57 Datasheet - Page 5

• Manufacturer Part Number: V23818-M15-B57
• Manufacturer: Infineon Technologies

Specifications of V23818-M15-B57

• Optical Fiber Type: TX/RX
• Data Transfer Rate: 2125Mbps
• Jitter: 0.04ns
• Operating Temperature Classification: Commercial
• Peak Wavelength: 1360/1580nm
• Package Type: SFP
• Operating Supply Voltage (min): 3.1V
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.5V
• Output Current: 50mA
• Operating Temp Range: 0C to 70C
• Mounting: Snap in
• Pin Count: 20
• Lead Free Status / RoHS Status: Supplier Unconfirmed

Functional Description of SFP Transceiver
This transceiver is designed to transmit serial data via single mode cable.
Figure 2
The receiver component converts the optical serial data into PECL compatible electrical
data (RD+ and RD-). The LOS of Signal (LOS, active low) shows whether an optical
signal is present.
The transmitter converts PECL compatible electrical serial data (TD+ and TD-) into
optical serial data. Data lines are differentially 100
The transmitter contains a laser driver circuit that drives the modulation and bias current
of the laser diode. The currents are controlled by a power control circuit to guarantee
constant output power of the laser over temperature and aging. The power control uses
the output of the monitor PIN diode (mechanically built into the laser coupling unit) as a
controlling signal, to prevent the laser power from exceeding the operating limits.
Single fault condition is ensured by means of an integrated automatic shutdown circuit
that disables the laser when it detects laser fault to guarantee the laser Eye Safety.
The transceiver contains a supervisory circuit to control the power supply. This circuit
makes an internal reset signal whenever the supply voltage drops below the reset
threshold. It keeps the reset signal active for at least 140 milliseconds after the voltage
has risen above the reset threshold. During this time the laser is inactive.
Data Sheet
Functional Diagram
RD
RD+
LOS
MOD-DEF
TxFault
TxDis
TD
TD+
Monitor
Automatic
Shut-Down
LEN
EEPROM
Receiver
Power
Control
Laser
Driver
5
Rx Coupling Unit
Laser
Coupling Unit
e/o
Laser
o/e
o/e
terminated.
Single Mode Fiber
V23818-M15-B57
Description
2002-05-06