SN2X-PRIMER STMicroelectronics, SN2X-PRIMER Datasheet - Page 8

• Manufacturer Part Number: SN2X-PRIMER
• Manufacturer: STMicroelectronics

Specifications of SN2X-PRIMER

• Lead Free Status / RoHS Status: Supplier Unconfirmed

Getting started
2.3
8/17
For example, to execute the Show Channel command, perform the following sequence:
1.
2.
3.
Table 3.
Scenario 1: Setting up a ZigBee network
One of the main goals of the SN2X-PRIMER evaluation is to demonstrate the basic ZigBee
network concepts used to form a simple two-node network using a Coordinator and a
Router device.
Generally, all nodes belonging to the same network communicate (transmit and receive) on
the same channel, or frequency. The personal area network identifier (PAN ID) is used to
uniquely identify this network.
The kit comes with default channel and PAN ID values of “20” and “0x1CC” respectively.
These values may be changed in the Coordinator (MB622) board before creating the
network.
Set Channel
Show Channel
Set PanID
Show PanID
Form Network
Permit Joining
Show LQI
Show EUI
Switch ON Router LED
Switch OFF Router LED Sends a unicast or a broadcast message to switch off the router LED.
Leave Network
Neighbor table
Change security key
LetItBee Version
Command Name
Connect jumper SW3 in 1-2 position to switch on the coordinator board, or press switch
SW2 to reset the board.
Scroll right to enter the first-level menu.
Scroll left or right to display Show Channel and press the joystick to confirm.
First-level menu commands
Selects the current ZigBee channel. The valid channel range is 11 to 26.
Displays the current channel.
Selects the identification number a personal area network (PAN).
Displays the current PAN ID. The valid range is 0x0000 to 0x3FFF.
Creates a new PAN.
Enables other devices to join the PAN.
Displays the link quality indicator of the last message received.
Displays the Extended Unique Identifier (EUI) address of the coordinator.
Sends a unicast or a broadcast message to switch on the router LED.
Leaves the network.
Shows the neighbor table information. For more information, refer to
Table
Activates the security features on the coordinator. The user can select and
enable the three security scenarios supported by the kit.
Shows the firmware version of the SN2xx-PRIMER evaluation tool and the
Ember ZigBee stack version.
4.
Description
UM0450