1CUFF1 Tyco Electronics, 1CUFF1 Datasheet - Page 2
![MODULE POWER ENTRY FLANGE 1A](/photos/6/21/62135/cuff1-series_sml.jpg)
1CUFF1
Manufacturer Part Number
1CUFF1
Description
MODULE POWER ENTRY FLANGE 1A
Manufacturer
Tyco Electronics
Series
CUr
Type
IEC 320-C14 (Male Pins)r
Specifications of 1CUFF1
Current
1A
Features
Fuse Holder, Switch On/Off Non-Illuminated
Filter Type
General Purpose
Fuse Drawer
Fuse Not Required
Mounting Type
Panel Mount, Screw Hole
Termination Style
Quick Connect - .187" (4.7mm)
Voltage
250VAC
Gender
Plug
Voltage Rating
250VAC
Current Rating
1A
Contact Termination
Quick Connect
Connector Type
Filtered Power Entry
Mounting Style
Flange
Filtered
Yes
Leakage Current
0.25 mA, 0.4 mA
Product
Power Entry Filter Modules
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
2-1609114-2
CCM1898
CCM1898
Corcom CU Series
1U Height Power
Entry Modules
KEY FEATURES
•
•
•
•
•
•
•
•
•
•
* 15A versions tested by Underwriters
Laboratories to US and Canadian
requirements and are VDE approved
at 10A @ 250 VAC.
Tyco Electronics I Corcom CU Series
Compact 1U (1 3/4”) Design
1A-15A*
Filtered and Unfiltered
SPST Switch
Shrouded Quick-Connect
Terminals
Various Mounting Styles
Lower Power Dissipation
Higher System Efficiency
Lower Cooling Demand
Underwriters Laboratories
Recognized,
CSA Certified and
VDE Approved*
1U Height Power
Entry Modules
DESCRIptION
The CU series joins the Corcom product family of Power Entry Modules, filling the
need for smaller versions of our switched inlet filters and unfiltered power inlets.
This series provides power entry for equipment designed for popular 1U (1
equipment racks. The filtered versions provide complete shielding, shrouded quick
connect terminals and basic filtering for 1A to 15A applications, in an extremely
compact size.
The design is available in snap-in and flanged mounting options. Filtered versions
are also available in a new rear mount style which provides a flush appearance with
enhanced EMI shielding. The unfiltered inlet snap-in versions are available in three
different configurations to fit a wide vareity of panel cut-outs and thicknesses and
with optional pre-connected terminals from the socket to the switch. The CU Series
features a common IEC 60320-1 C-14 power inlet for international compatibility.
Refer to the C, GG, P, and M Series PEMs for applications requiring additional
features.
ApplICAtIONS
Rack mounted equipment, telecom, consumer electronics, power supplies, routers,
PCs, TVs, lighting, imaging equipment, set-top boxes and other applications with
limited panel space.
StANDARD AND SpECS
Maximum Leakage current, each line to ground (filtered models only) :
Hipot rating (one minute) : line-to-ground 1500 VAC, line-to-line 1450 VDC
Operating Frequency : 50/60 Hz
Rated Voltage : 250 VAC
Rated currents : 1A, 3A, 6A, 10A, 15A
Operating Voltage : 120/250 VAC
Switch : Single pole single throw
Terminal Push-on Force : 15 lb / 67 N (max)
ElECtRICAl SChEMAtICS
Line
@120 VAC 60 Hz : .25 mA and @ 250 VAC 50 Hz: .40 mA
Load
3 /
4
”) height