GLK12232-25-WB-V Matrix Orbital, GLK12232-25-WB-V Datasheet - Page 16

• Manufacturer Part Number: GLK12232-25-WB-V
• Description: LCD GRAPHIC DISPL 122X32 WHT BLU
• Manufacturer: Matrix Orbital
• Series: -r

Specifications of GLK12232-25-WB-V

• Display Type: LCD - Color
• Display Mode: Transmissive
• Viewing Area: 76.00mm L x 25.20mm W
• Backlight: LED - White
• Dot Size: 0.52mm W x 0.62mm H
• Dot Pitch: 0.53mm x 0.53mm
• Dot Pixels: 122 x 32
• Interface: I²C, RS232, TTL
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: GLK12232-25-WBL-V

4.2.1 Set drawing color (254 99 [color])
color passed as a parameter. The parameter [color] is the value of the color where white 0 Hex, and black is
255 Hex.
4.2.2 Draw line (254 108 [x1][y1][x2][y2])
be drawn from any part of the display to any other part, but may be important to note that the line may
interpolate differently right to left, or left to right. This means that a line drawn in white from right to left
may not fully erase the same line drawn in black from left to right.
4.2.3 Continue line (254 101 [x][y])
command uses the global drawing color so the “Set drawing color” command should be used before the first
line segment if required.
4.2.4 Put pixel (254 112 [x][y])
requests fast enough to keep up with a steady stream at 115 kbaud, so flow control is not required.
4.2.5 Draw outline rectangle (254 114 [color][x1][y1][x2][y2])
corner is specified by (x1,y1) and the bottom right corner by (x2,y2).
4.2.6 Draw solid rectangle (254 120 [color][x1][y1][x2][y2])
corner is specified by (x1,y1) and the bottom right corner by (x2,y2). Since this command involves consid-
erable processing overhead, we strongly recommend the use of flow control, particularly if the command
is to be repeated frequently.
constantly being updated from, say, a temperature sensor.
Matrix Orbital
This command sets the drawing color for subsequent graphic commands that do not have the drawing
This command will draw a line from (x1,y1) to (x2,y2) using the current drawing color. Lines may
This command will draw line with the current drawing color from the last line end (x2,y2) to (x,y). This
This command will draw a pixel at (x,y) using the current drawing color. The unit processes these
This command draws a rectangular box in the specified color (0 = white, non-zero = black). The top left
This command draws a solid rectangle in the specified color (0 = white, non-zero = black). The top left
This procedure is common for monitoring applications where there is a ’field’ on the display that is
NOTE All non-zero values will display as black.
GLK12232-25-WBL
12