10211 Carclo Technical Plastics, 10211 Datasheet - Page 2

• Manufacturer Part Number: 10211
• Description: LENS TIR 20MM RIPPLE WIDE FLANGE
• Manufacturer: Carclo Technical Plastics

Specifications of 10211

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1066-1028

Carclo Technical Plastics 111 Buckingham Ave, Slough, Berkshire, SL1 4PF ENGLAND
Tel: [phone] Fax: [phone]
10205 20.0mm Circular Black
10206 20.0mm Circular Clear
10207 20.0mm Circular White
10276 50.0mm Triple White
10286 50.0mm Triple White
10296 50.0mm Triple Black
10306 50.0mm Circular Black
10425 20.0mm Hexagonal Black
10426 20.0mm Hexagonal Clear
10427 20.0mm Hexagonal White
10428 20.0mm Hexagonal Black
10429 20.0mm Hexagonal Clear
10430 20.0mm Hexagonal White
47.313.5101.80 with
47.313.-320.80 20.0mm BJB Black
Carclo Technical Plastics endeavours to continuously improve and renew its products; for this reason the technical data and contents of this
catalogue may undergo variations without prior notice. For correct and up to date information, Carclo suggest using the Opticselect tool on our
website http://www.carclo-optics.com.
Copyright © Carclo 2010
Handling instructions
Please note that flow lines, weld lines, surface scratches and small black or white inclusions within the lenses are acceptable if the optical
performance of the lens is within the specification described to +/-10%. FWHM-Full (beam) Width as measured at one Half of Maximum intensity,
information shown in the catalogue are based on our laboratory's tests.
All rights reserved. No part of this publication may be copied, reproduced in any form or by any means, electronic, mechanical, photocopying,
recording or otherwise, illustrations not to be removed, without our prior permission. Carclo Technical Plastics reserves the right to make changes at
any time in order to supply the best products possible.
Related Holders & LEDs
Do not handle or install lenses without wearing gloves, skin oils may damage the lens or the light transmission.
Clean lenses with a mild soap and water and dry with a clean soft cloth.
Do not use any commercial solvents on lenses.
Mount holders with low Odour epoxy's and allow time for them to out gas to stop lenses fogging.
Cool White
Avago
Aveon
Warm White
Moonstone
Avago
XLamp®
White
Cree
XR®
XLamp®
XR-C®
White
Cree
XLamp®
XR-E®
White
Cree
Page 2