PVS0204W172 Panduit Corp, PVS0204W172 Datasheet - Page 80

• Manufacturer Part Number: PVS0204W172
• Description: TAG/SIGN WARN/LOCKOUT SWITCHS(2)
• Manufacturer: Panduit Corp

Specifications of PVS0204W172

• Label Size: 2.250" x 4.500" (57.15mm x 114.30mm)
• Color: -
• For Use With/related Products: -
• Label Type: -

How to Install Snap-On Pipe Markers
1.Spring open desired pipe marker.
How to Install Strap-On Pipe Markers
1.Thread tie over the edge and thru
How to Install Pressure Sensitive Pipe Markers
1.Clean the pipe with an appropriate
78
the hole of the marker. Proceed
threading under the marker, thru
the opposite hole, then over the
edge of the marker.
cleaner and allow to dry.
Pipe Marker Installation Instructions
2.Wrap marker around the pipe. The
2.Place the marker against the pipe.
2.Separate the pipe marker from the
marker will completely encircle the
pipe for 360° visibility. Be sure the
directional flow arrows are pointed
in the proper direction.
Be sure the directional flow arrows
are pointed in the proper direction.
liner.
3.Finish by peeling off the adhesive
3.Secure strap snugly around the
3.Apply the marker to the
liner from the clear tape and
secure the tape to the marker.
pipe, tension and cut the tie using
Panduit recommended tool.
pre-cleaned area of the pipe.