H7CX-A4-N AC100-240 Omron, H7CX-A4-N AC100-240 Datasheet - Page 50
![COUNTER DIGITAL 4DIG SPDT SCREW](/photos/6/44/64481/h7cx-a4-n_ac100-240_sml.jpg)
H7CX-A4-N AC100-240
Manufacturer Part Number
H7CX-A4-N AC100-240
Description
COUNTER DIGITAL 4DIG SPDT SCREW
Manufacturer
Omron
Specifications of H7CX-A4-N AC100-240
Count Rate
30Hz or 5kHz Selectable
Number Of Digits/alpha
4
Input Type
Voltage, Switch Closure, Transistor Switch
Output Type
Switch Closure
Voltage - Supply
100 V ~ 240 VAC
Display Type
LCD Backlit
No. Of Digits / Alpha
4
Digit Height
12mm
Power Consumption
9.4VA
Counting Speed
5kHz
Operating Temperature Range
-10°C To +55°C
Character Size
11.5mm
Supply Voltage Min
100VAC
Panel Cutout Width
45mm
Meter Function
Counter
Rohs Compliant
Yes
Connector Type
Screw Terminal
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
H7CXA4NAC100240
Z3043
Z3043
50
H7CX-R@-N
Precautions for the H7CX-R
In upper and lower limit output mode, if the comparison value setting is such that comparison value 1 comparison value 2, the output will always
be ON.
Hold Function
The measurement value (display value) and output are sustained while the hold input is ON.
Note: The output will maintain the current status when the hold key is pressed.
Example:
* The H7CX-R11W@-N does not have a hold input.
Operation in DIP Switch Monitor Mode
The H7CX-R is also equipped with a DIP switch monitor function, a convenient function that enables the settings of the DIP switch pins to be
confirmed using the front display.
DIP Switch
Monitor
Mode
Run Mode
Output mode
Key
Lower limit
setting
Power ON
1 s min.
+
Comparison value (lower limit)
1
*
Hold input* (Hold Key)
DIP switch monitor
Display value
OUT
: Measurement stopped
: Measurement possible
1
Key
Operation
The status of the DIP switch pins (1 to 8) can be confirmed using the U Key.
* When the mode is changed to DIP switch monitor, the measurement value is reset, outputs turns OFF, and
Note: To change the mode to DIP switch monitor mode, press the
measuring stops.
OFF
ON
Example
1 2 3 4 5 6 7 8
for 1 s min. with the
if the
Actual input
1
Sustained output
Key is pressed first.
Sustained display value
Key held down. The mode will not change
…Indicates that DIP switch pin 8 is ON.
…Indicates that DIP switch pin 7 is OFF.
…Indicates that DIP switch pin 6 is ON.
…Indicates that DIP switch pin 5 is OFF.
…Indicates that DIP switch pin 4 is ON.
…Indicates that DIP switch pin 3 is OFF.
…Indicates that DIP switch pin 2 is ON.
…Indicates that DIP switch pin 1 is OFF.
1
Key