H7HP-C8B Omron, H7HP-C8B Datasheet - Page 2
![COUNTER TOTAL 8DIGT 100-240V](/photos/17/49/174916/h7etf_sml.jpg)
H7HP-C8B
Manufacturer Part Number
H7HP-C8B
Description
COUNTER TOTAL 8DIGT 100-240V
Manufacturer
Omron
Datasheet
1.Y92S-33.pdf
(10 pages)
Specifications of H7HP-C8B
Count Rate
*
Number Of Digits/alpha
*
Input Type
*
Voltage - Supply
*
Display Type
*
Output Type
*
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
H7HPC8B
Specifications
■ Ratings
Note: 1. Contains 20% ripple (p-p) max.
Rated supply voltage
External power supply
Operating voltage range
Power consumption
Dimensions
Mounting method
External connections
Degree of protection
Display
Digits
Function
Input mode
Max. counting speeds
Counting range
Time specification
Timing accuracy
Memory backup
Input
Input re-
sponse
speed
Reset system
2. Only a non-voltage input (NPN transistor) is possible for the key protection input. The key protection input will be a non-voltage input even
if the NPN/PNP input mode is set to PNP. Key protection is used to prohibit operating the Reset Key. The reset input terminals will still be
functional.
Item
Input signals
Input method
Count, start,
gate, reset
Key protection
Reset
Start
Key protection
100 to 240 VAC (50/60 Hz) 12 to 24 VDC (see note 1) 100 to 240 VAC (50/60 Hz) 12 to 24 VDC (see note 1)
50 mA at 12 VDC
85% to 110% of rated supply voltage
100 to 240 VAC: 6.5 VA max.
12 to 24 VDC:
72 x 36 x 66 mm (W x H x D)
Flush mounting
Screw terminals
Panel surface: IP66 with oil resistance, NEMA 4 (indoors). Panel surface only: IEC IP66. IEC IP66
7-segment, negative transmissive LCD (with red backlight)
6 digits (15-mm-high characters)
Total counter/time counter (selected via DIP switch)
Up/down (individual) (total counter), or accumulative
(time counter)
30 Hz or 5 kHz (selected via DIP switch)
–99999 to 999999
0.1 to 99999.9 h/1 s to 99 h 59 min 59 s
±100 ppm (–10°C to 55°C)
EEP-ROM: 200,000 operations min.
Count 1/start, count 2/gate, reset, and key protection (see note 2)
No-voltage input (NPN transistor input) or voltage input (PNP transistor input) (selected via DIP switch)
No-voltage input (NPN transistor input)
Voltage input (PNP transistor input)
No-voltage input (NPN transistor input)
Time counter: 20 ms; total counter: 20 ms or 1 ms (automatically switched according to counting speed)
Time counter: 20 ms
Approx. 1 s
External and manual resets
Short-circuit (ON) impedance:
Short-circuit (ON) residual voltage: 2 VDC max.
Open (OFF) impedance:
Short-circuit (ON) impedance:
ON voltage:
OFF voltage:
Open (OFF) impedance:
Short-circuit (ON) impedance:
Short-circuit (ON) residual voltage: 0.5 VDC max.
Open (OFF) impedance:
H7HP-A
6-digit total counter/time counter
0.6 W max.
---
H7HP-AD
1 kΩ max.
100 kΩ min.
1 kΩ max.
9 to 24 VDC
5 VDC max.
100 kΩ max.
1 kΩ max.
100 kΩ min.
50 mA at 12 VDC
8 digits (12-mm-high characters)
Total counter
Up/down (individual)
–9999999 to 99999999
---
---
Approx. 1 s
H7HP-C8
8-digit total counter
---
H7HP-C8D
H7HP
2