MK1491-09FLNTR IDT, Integrated Device Technology Inc, MK1491-09FLNTR Datasheet - Page 3

• Manufacturer Part Number: MK1491-09FLNTR
• Description: IC CLK SRC AMD GEODE GX2 28-SSOP
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Clock Synthesizerr

Specifications of MK1491-09FLNTR

• Input: Crystal
• Output: LVCMOS
• Frequency - Max: 66MHz
• Voltage - Supply: 3.15 V ~ 3.45 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 28-SSOP
• Frequency-max: 66MHz
• Number Of Elements: 1
• Supply Current: 60mA
• Pll Input Freq (min): 14.31818MHz
• Operating Supply Voltage (typ): 3.3V
• Operating Temp Range: 0C to 70C
• Package Type: SSOP
• Output Frequency Range: 33 to 66MHz
• Operating Supply Voltage (min): 3.13V
• Operating Supply Voltage (max): 3.46V
• Operating Temperature Classification: Commercial
• Pin Count: 28
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 800-1931-2; MK1491-09FLNTR

Pin Descriptions
IDT™ AMD GEODE™ GX2 CLOCK SOURCE
1, 7, 11, 15, 21, 22
4, 8, 12, 19, 25, 28
MK1491-09
AMD GEODE™ GX2 CLOCK SOURCE
18, 20, 23, 24
Number
5, 6, 9
KEY: I = Input, TI = Tri-level, O = Output, P = Power supply connection, (T)I/O = Input on power up, becomes an
Output after 10 ms, Weak internal pull-up resistors are present on TS#, Spread#, PD#, and Sel66/33.
Pin
10
13
14
16
17
26
27
2
3
Sel66/33#
RefCLK0/
48M/TS#
RefCLK1
Spread#
PCICLK
LPC or
Name
LCLK
GND
VDD
48M
66M
PD#
Pin
XO
XI
Type
Pin
I/O
I/O
O
O
O
O
O
O
P
P
I
I
I
Connect to Ground.
Crystal connection. Connect to a 14.31818 MHz crystal or input clock.
Crystal connection. Connect to a 14.31818 MHz crystal or leave
unconnected.
Connect to 3.3 V.
33 MHz low skew clock outputs for LPC interface. These clocks are
synchronous outputs with low skew.
When high, the PCICLK runs at 66 MHz; when low, the PCICLK runs at
33 MHz. This pin has a weak internal pull-up resistor. This is an active
input, not a latched input.
48 MHz clock output.
48 MHz clock output. TS# is a latched input at power up and tristates all
outputs when low upon power up. When high upon power up, all
outputs are enabled. Power must be cycled for a change of state to be
detected. This pin has a weak internal pull-up resistor.
66 MHz clock output.
Power-down input. This is an active input not latched input. When this
pin is set low, all clock outputs will be stopped, all PLL’s will be stopped,
and the oscillator will be powered off. Weak pull-up resistor (see Power
Down table).
33 to 66 MHz PCI synchronous clock outputs with low skew.
Buffered reference output of 14.31818 MHz.
Buffered reference output of 14.31818 MHz. Spread# is a latched input
upon power up. Spread is applied to all clocks except REFCLK’s and
48 MHz. Power must be cycled for a change of state to be detected.
This pin has a weak internal pull-up resistor. See spread table.
3
Pin Description
CLOCK SYNTHESIZER
MK1491-09
REV M 051310