ADF4212BRU-REEL7 Analog Devices Inc, ADF4212BRU-REEL7 Datasheet - Page 19

• Manufacturer Part Number: ADF4212BRU-REEL7
• Description: IC PLL FREQ SYNTHESIZER 20-TSSOP
• Manufacturer: Analog Devices Inc
• Type: Clock/Frequency Synthesizer (RF/IF)r

Specifications of ADF4212BRU-REEL7

• Rohs Status: RoHS non-compliant
• Pll: Yes
• Input: CMOS
• Output: Clock
• Number Of Circuits: 1
• Ratio - Input:output: 3:1
• Differential - Input:output: Yes/No
• Frequency - Max: 2.7GHz
• Divider/multiplier: No/No
• Voltage - Supply: 2.7 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 20-TSSOP
• Frequency-max: 2.7GHz

PCB Guidelines for Chip Scale Package
The lands on the chip scale package (CP-20), are rectangular.
The printed circuit board pad for these should be 0.1 mm
longer than the package land length and 0.05 mm wider than
the package land width. The land should be centered on the
pad. This will ensure that the solder joint size is maximized.
The bottom of the chip scale package has a central thermal pad.
The thermal pad on the printed circuit board should be at least
as large as this exposed pad. On the printed circuit board, there
should be clearance of at least 0.25 mm between the thermal
pad and inner edges of the pad pattern. This will ensure that
shorting is avoided.
0.035 (0.90) MAX
0.033 (0.85) NOM
INDICATOR
SEATING
PLANE
PIN 1
0.006 (0.15)
0.002 (0.05)
PIN 1
SEATING
12 MAX
PLANE
0.020 (0.50)
Thin Shrink Small Outline Package (TSSOP)
20
1
BSC
0.0256 (0.65)
0.157 (4.0)
BSC SQ
CONTROLLING DIMENSIONS ARE IN MILLIMETERS
0.260 (6.60)
0.252 (6.40)
VIEW
TOP
BSC
Dimensions shown in inches and (mm).
OUTLINE DIMENSIONS
0.031 (0.80) MAX
0.026 (0.65) NOM
0.008 (0.20)
0.0118 (0.30)
0.0075 (0.19)
REF
Chip Scale Package
0.148 (3.75)
0.0433 (1.10)
BSC SQ
11
10
MAX
0.177 (4.50)
0.169 (4.30)
(RU-20)
(CP-20)
0.0004 (0.01)
0.002 (0.05)
0.0 (0.0)
0.0035 (0.090)
0.0079 (0.20)
ADF4210/ADF4211/ADF4212/ADF4213
0.024 (0.60)
0.017 (0.42)
0.009 (0.24)
0.012 (0.30)
0.009 (0.23)
0.007 (0.18)
0.030 (0.75)
0.022 (0.60)
0.014 (0.50)
Thermal vias may be used on the printed circuit board thermal
pad to improve thermal performance of the package. If vias are
used, they should be incorporated in the thermal pad at 1.2 mm
grid pitch. The via diameter should be between 0.3 mm and
0.33 mm and the via barrel should be plated with 1 oz. copper
to plug the via. The user should connect the printed circuit
board pad to AGND.
0.256 (6.50)
0.246 (6.25)
0.024 (0.60)
0.017 (0.42)
0.009 (0.24)
8
0
15
11
10
16
0.080 (2.00)
BOTTOM
VIEW
REF
0.010 (0.25)
0.028 (0.70)
0.020 (0.50)
20
MIN
6
1
5
0.080 (2.25)
0.083 (2.10) SQ
0.077 (1.95)