1-5530843-0 TE Connectivity, 1-5530843-0 Datasheet - Page 2

• Manufacturer Part Number: 1-5530843-0
• Description: CONN SEC II 43 POS 100C/L
• Manufacturer: TE Connectivity

Specifications of 1-5530843-0

• Product Type: Connector
• Product Series: Standard Edge II
• Bus Type: Multibus I
• Type Of Connector: Standard
• Number Of Dual Positions: 43
• Post Type: Solder Post
• Pcb Mounting Orientation: Vertical
• Mounting Ears: Without
• Pcb Mount Retention: Without
• High Current: No
• Termination Post Length (mm [in]): 3.18 [0.125]
• Solder Tail Contact Plating: Tin
• Centerline (mm [in]): 2.54 [0.100]
• Retention Latch: Without
• Positions Unloaded: None
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Phosphor Bronze
• Underplate Material: Nickel
• Housing Material: Polyester GF
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant

3.4.
3.5.
Rev K
Exam ination of product.
Term ination resistance, dry circuit.
Dielectric withstanding voltage.
Insulation resistance.
Vibration, random .
Physical shock.
Mating force.
Unm ating force.
Perform ance and Test Description
Product is designed to m eet the electrical, m echanical and environm ental perform ance requirem ents
specified in Figure 1. All tests are perform ed at am bient tem perature unless otherwise specified.
Test Requirem ents and Procedures Sum m ary
Test Description
Meets requirem ents of product
drawing.
10 m illiohm s m axim um .
5 m illiam peres m axim um leakage.
5000 m egohm s m inim um .
No discontinuities greater than 1
m icrosecond.
No discontinuities greater than 1
m icrosecond.
19 ounces m axim um per contact
pair.
1.25 ounces m inim um per contact
pair.
Test Voltage
RMS
1000
1500
Figure 1 (continued)
MECHANICAL
Requirem ent
Centerline
Spacing
.100
.125
Visual, dim ensional and functional
per applicable quality inspection
plan.
TE Spec 109-6-1.
Subject m ated contacts assem bled
in housing to 50 m v open circuit at
100 m a m axim um .
See Figure 3.
TE Spec 109-29-1.
Test between adjacent contacts of
unm ated connector assem blies.
TE Spec 109-28-4.
Test between adjacent contacts of
unm ated connector assem blies.
TE Spec 109-21-5, Condition C.
Subject m ated connectors to 9 G's
rm s for 3 m inutes.
See Figure 4.
TE Spec 109-26-1.
Subject m ated connectors to 50
G's half-sine shock pulses of 11
m illiseconds duration. 3 shocks in
each direction applied along 3
m utually perpendicular planes, 18
total shocks.
See Figure 4.
TE Spec 109-42, Condition A.
Measure force necessary to m ate
connector with daughter card from
point of initial contact using free
floating fixtures at a rate of .5 inch
per m inute.
Calculate force per contact.
TE Spec 109-42, Condition A.
Measure force necessary to
unm ate assem blies at a rate of .5
inch per m inute.
Calculate force per contact.
Procedure
108-9039
2 of 7