1-644892-2 TE Connectivity, 1-644892-2 Datasheet - Page 2

• Manufacturer Part Number: 1-644892-2
• Description: 12P CST100 SHRD HDR ASSY WOPEG
• Manufacturer: TE Connectivity

Specifications of 1-644892-2

• Rohs Compliant: NO
• Connector Type: Header
• Product Line: CST-100
• Pcb Mounting Orientation: Vertical
• Pcb Mount Retention: Without
• Mating Connector Lock: Without
• Four Points Of Contact: Without
• Shrouded: Yes
• Mounting Ears: Without
• Post Size (mm [in]): 0.64 [.025]
• Panel Mount Retention: Without
• Voltage Rating (vac): 250
• Solder Tail Contact Plating: Matte Tin-Lead
• Termination Post Length (mm [in]): 3.56 [0.140]
• Number Of Positions: 12
• Centerline (mm [in]): 2.54 [0.100]
• Solder Tail Contact Material: Copper Alloy
• Recycle: Yes
• Contact Type: Pin
• Contact Shape: Square
• Contact Plating, Mating Area, Material: Tin-Lead
• Contact Base Material: Copper Alloy
• Connector Style: Plug
• Housing Color: Black
• Mating Alignment: Without
• Ul Flammability Rating: UL 94V-0
• Housing Material: Polyester
• Backwall/post Interruption(s): Without
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not suitable for lead free processing
• Applies To: Printed Circuit Board
• Application Use: Wire-to-Board

3.3.
3.4.
3.5.
Examination of product.
Termination resistance.
Insulation resistance.
Dielectric withstanding voltage.
Temperature rise vs current.
Solderability.
Sinusoidal vibration.
Rev C
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per Test Specification 109-1.
Test Requirements and Procedures Summary
Test Description
Voltage: 250 volts AC
Current: See Figure 4 for applicable current carrying capability
Temperature: -55 to 105° C
Meets requirements of product
drawing and Application
Specification 114-16019.
10 milliohms maximum final.
1000 megohms minimum initial.
100 megohms minimum final.
One minute hold with no breakdown
or flashover.
1.3 milliamperes maximum leakage
current.
30° C maximum temperatur e rise at
specified current.
Solderable area shall have a
minimum of 95% solder coverage.
No discontinuities of 1 microsecond
or longer duration.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
Visual, dimensional and functional
per applicable quality inspection
plan.
TE 109-6-1.
Subject mated contacts assembled
in housing to 50 millivolts maximum
open circuit at 100 milliamperes
maximum.
See Figure 3.
TE Spec 109-28-4.
Test between adjacent contacts of
mated or unmated specimens.
TE Spec 109-29-1.
1000 volts AC at sea level.
Test between adjacent contacts of
mated or unmated specimens.
TE Spec 109-45-1.
Measure temperature rise vs
current.
See Figure 4.
TE Spec 109-11-2.
Subject header posts to
solderability.
TE Spec 109-21-1.
Subject mated specimens to 10-55-
10 Hz traversed in 1 minute with .06
inch maximum excursion. Two
hours in each of 3 mutually
perpendicular planes.
See Figure 5.
Procedure
108-1328
2 of 8