DS1010S-60 Maxim Integrated Products, DS1010S-60 Datasheet - Page 4

• Manufacturer Part Number: DS1010S-60
• Description: DELAY LINE 10TAP 60NS 16-SOIC
• Manufacturer: Maxim Integrated Products

Specifications of DS1010S-60

• Number Of Taps/steps: 10
• Function: Tapped
• Delay To 1st Tap: 6nS
• Tap Increment: 6nS
• Available Total Delays: 60ns
• Voltage - Supply: 4.75 V ~ 5.25 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 16-SOIC (0.300", 7.5mm Width)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Independent Delays: -

NOTES:
1. All voltages are referenced to ground.
2. Measured with outputs open.
3. V
4. See “Test Conditions” section.
5. For DS1010 delay lines with a TAP 10 delay of 100 ns or greater, temperature variations from 25 C
6. For DS1010 delay lines with a TAP 10 delay less than 100 ns, temperature variations from 25 C to
7. All tap delays tend to vary unidirectionally with temperature or voltage changes. For example, if TAP
8. Pulse width and period specifications may be exceeded; however, accuracy will be application-
9. Certain high-frequency applications not recommended for -50 in 16-pin package. Consult factory.
TIMING DIAGRAM: SILICON DELAY LINE Figure 2
whichever is greater.
to 0 C or 70 C may produce an additional input-to-tap delay shift of 2ns or 3%, whichever is
greater.
0 C or 70 C may produce an additional input-to-tap delay shift of 1 ns or 9%, whichever is greater.
1 slows down, all other taps will also slow down; TAP 3 can never be faster than TAP 2.
sensitive (decoupling, layout, etc.).
CC
= 5V @ 25°C. Input-to-tap delays accurate on both rising and falling edges within ±2 ns or ±5%
4 of 6
DS1010