111196-7 TE Connectivity, 111196-7 Datasheet - Page 2

• Manufacturer Part Number: 111196-7
• Description: WIRE-BOARD CONN RECEPTACLE 30POS, 1.27MM
• Manufacturer: TE Connectivity
• Series: AMPMODU System 50 Seriesr

Specifications of 111196-7

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Connector Type: Wire-to-Board
• Rohs Compliant: No
• Product Type: Free Hanging Receptacles
• Pitch: 2.54 mm
• Number Of Positions / Contacts: 30
• Mounting Style: Cable
• Housing Material: Thermoplastic, Glass Filled
• Contact Material: Phosphor Bronze
• Contact Plating: Gold
• Voltage Rating: 30 VAC
• Current Rating: 0.5 A
• Termination Style: IDC
• Wire Type: Ribbon Cable
• Type Of Connector: Rectangular
• Mating Connector Lock: With
• Wire/cable Type: Ribbon Cable
• Mating Connector Lock Type: Latch
• Voltage (vac): 30
• Insulation Resistance (m?): 5,000
• Contact - Rated Current (a): 0.5
• Solder Tail Contact Plating: Tin-Lead
• Number Of Positions: 30
• Number Of Rows: Dual
• Ribbon Cable Centerline Spacing (mm [in]): 0.64 [0.025]
• Latch Material: Stainless Steel
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold
• Connector Style: Receptacle
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Applies To: Cable
• Temperature Range (°c): -65 – +105
• Lead Free Status / Rohs Status: No

3.2.
3.3.
3.4.
3.5.
Rev B
Initial examination of product.
Final examination of product.
Low level contact resistance.
Insulation resistance.
Withstanding voltage.
Vibration, sinusoidal.
Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per EIA-364.
Test Requirements and Procedures Summary
Test Description
Voltage: 30 volts AC
Current: Signal application only, 0.5 ampere maximum per single circuit
Temperature: -65 to 105° C
Meets requirements of product
drawing.
Meets visual requirements.
30 milliohms maximum.
5000 megohms minimum.
1 minute hold with no breakdown or
flashover.
No discontinuities of 1 microsecond
or longer duration.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
EIA-364-18.
Visual and dimensional (C of C)
inspection per product drawing.
EIA-364-18.
Visual inspection.
EIA-364-23.
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
See Figure 3.
EIA-364-21.
Test between adjacent contacts of
unmated and unterminated
contacts within a row.
EIA-364-20,
Condition I.
200 volts AC at sea level.
Test between adjacent contacts of
unterminated specimens.
EIA-364-28,
Test Condition III.
Subject mated specimens to 10-
2000-10 Hz traversed in 15 minutes
with 1.5 mm [.06 in] maximum total
excursion. 4 hours in each of 3
mutually perpendicular planes.
See Figure 4.
Procedure
108-1109
2 of 6