2-111492-5 TE Connectivity, 2-111492-5 Datasheet - Page 3
![050 UNIV I/O 30DP NO EARS LTCH](/photos/41/49/414999/pr111492-1_sml.jpg)
2-111492-5
Manufacturer Part Number
2-111492-5
Description
050 UNIV I/O 30DP NO EARS LTCH
Manufacturer
TE Connectivity
Series
Universal I/Or
Specifications of 2-111492-5
Product Line
AMP-LATCH
Connector Type
Connector Assembly
Shrouded
Yes
Termination Method To Wire/cable
IDC
Ul File Number
E28476
Csa File Number
LR 7189
Mating Post Length (mm [in])
6.10 [0.240]
Panel Mount Retention
Without
Contact - Rated Current (a)
1
Operating Voltage Reference
AC
Operating Voltage (vac)
250
Wire/cable Size (awg)
26 – 28
Wire/cable Size (mm²)
0.08 – 0.15
Wire/cable Size (cma)
158 – 296
Profile Height (y-axis) (mm [in])
23.75 [0.935]
Number Of Positions
50
Centerline (mm [in])
2.54 [0.100]
Row-to-row Spacing (mm [in])
2.54 [0.100]
Number Of Rows
2
Mating Retention
With
Length (x-axis) (mm [in])
78.03 [3.072]
Width (z-axis) (mm [in])
8.38 [0.3299]
Contact Type
Pin
Contact Base Material
Phosphor Bronze
Contact Plating, Mating Area, Material
Gold or Palladium Nickel or Performance Based
Contact Plating, Mating Area, Thickness (µm [?in])
0.762 [30]
Connector Style
Plug
Mating Alignment
With
Mating Alignment Type
Keyed
Housing Color
Black
Ul Flammability Rating
UL 94V-0
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Agency/standard
UL, CSA
Ul Rating
Recognized
Ul Voltage Rating (vac)
250
Operating Temperature (°c [°f])
-65 – +105 [-85 – +221]
Applies To
Wire/Cable
Accepts Wire Insulation Diameter, Range (mm [in])
0.81 – 0.97 [0.032 – 0.0381]
Application Use
Wire-to-Wire
Contact Transmits (typical Application)
Signal (Data)
Packaging Method
Tray
Thermal shock.
Humidity-temperature
cycling.
Mixed flowing gas.
Temperature life.
Rev A
NOTE
Test Description
(a)
(b)
(c)
Shall meet visual requirements, show no physical damage, and shall
meet requirements of additional tests as specified in test sequence in
Figures 2.
Termination resistance, durability and mating and unmating force are a
function of mating receptacle connectors. When tested using AMP-
LATCH receptacle connectors, these connectors will perform to same
requirements specified for mating receptacle connectors in Product
Specification 108-40000 with compatible plating. TE cannot be
responsible for termination resistance, durability and mating and
unmating force when mated to other than TE receptacle connectors.
Continuous current rating for individual contacts cannot be applied
directly to number of contacts as they are dependent on thermal and
physical properties of material. System design shall assure that
continuous current rating does not create internal hot spots that exceed
temperature designated by connector specification during steady state or
transient conditions.
See Note (a).
See Note (a).
See Note (a).
See Note (a).
ENVIRONMENTAL
Figure 1 (end)
Requirement
Subject unmated connectors to 5
cycles between -65 and 105° C.
Test Specification 109-22.
Subject unmated connectors to 10
humidity-temperature cycles
between 25 and 65°C at 95% RH.
Test Specification 109-23-4,
Condition B.
Subject mated connectors to
environmental class III for 20 days
for 15 and 30 microinch gold
plating. Test Specification 109-85-
3.
Subject mated connectors to
temperature life at 105° C for 500
hours. Test Specification 109-43.
Procedure
108-1336
3 of 6