2-1601095-2 TE Connectivity, 2-1601095-2 Datasheet - Page 3

• Manufacturer Part Number: 2-1601095-2
• Description: 131-166-014=TAB,PCB,STD,SMZ
• Manufacturer: TE Connectivity

Specifications of 2-1601095-2

• Product Type: Terminal
• Terminal Configuration: Posted
• Specials: Standard
• Tab Hole/dimple: None
• Tab Size (mm [in]): 1.02 x 0.51 [.040 x .020]
• Magnet Wire Range (mm [awg]): 0.16 – 1.02 [18 – 34]
• Length (mm [in]): 11.57 [0.456]
• Plating Material: Pre-Tin over Copper
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C, Reflow solder capable to 245°C, Reflow solder capable to 260°C, Pin-in-Paste capable to 245°C, Pin-in-Paste capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Reverse Reeled

3.5.
Tem perature life.
Rev B
NOTE
Product Qualification and Requalification Test Sequence
Test Description
(1)
(2)
(2)
NOTE
Vertical force required to extract the terminal from a pocket (cavity) molded to Tyco
Electronics guidelines in Nylon 6/6 30% GF.
Vertical force required to extract a PVC insulated stranded lead wire secured with Lead Lok
from a pocket (cavity) molded in Nylon 6/6 30% GF that complies with Tyco Electronics
specifications.
Shall meet visual requirements, show no physical damage, and meet the requirements of
additional tests as specified in the Product Qualification and Requalification Test Sequence
shown in Figure 2.
(a)
(b)
Initial exam ination of product
LLCR
Current cycling
Retention force
Therm al shock
Hum idity/tem perature cycling
Tem perature life
Final exam ination of product
See paragraph 4.1.A.
Numbers indicate sequence in which tests are performed.
Test or Exam ination
See Note 3.
Figure 1 (end)
Requirem ent
Figure 2
2,5
1
4
3
6
1
Test Sequence (b)
Test Group (a)
2,4
2
1
3
5
1
3
2
3
EIA-364-17.Subject specim ens to
118°C for 33 days.
2,4
4
1
3
5
Procedure
108-2085
3 of 5