3-111623-1 TE Connectivity, 3-111623-1 Datasheet

012 2MM CTR 30DP FT

3-111623-1

Manufacturer Part Number
3-111623-1
Description
012 2MM CTR 30DP FT
Manufacturer
TE Connectivity
Series
2.0 [.079] AMP-LATCHr
Datasheets

Specifications of 3-111623-1

Product Line
AMP-LATCH
Connector Type
Connector Assembly
Termination Method To Wire/cable
IDC
Ul File Number
E28476
Csa File Number
LR 7189
Contact - Rated Current (a)
0.5
Operating Voltage Reference
AC
Operating Voltage (vac)
125
Wire/cable Size (awg)
28
Wire/cable Size (mm²)
0.08
Wire/cable Size (cma)
158
Profile Height (y-axis) (mm [in])
8.48 [0.3339]
Number Of Positions
12
Centerline (mm [in])
2.00 [0.079]
Row-to-row Spacing (mm [in])
2.54 [0.100]
Number Of Rows
2
Mating Retention
Without
Length (x-axis) (mm [in])
17.15 [0.6752]
Width (z-axis) (mm [in])
5.58 [0.2197]
Contact Design
Single Beam
Contact Type
Socket
Contact Base Material
Phosphor Bronze
Contact Plating, Mating Area, Material
Gold or Palladium Nickel or Performance Based
Contact Plating, Mating Area, Thickness (µm [?in])
0.762 [30]
Connector Style
Receptacle
Mating Alignment
With
Mating Alignment Type
Polarization
Housing Color
Black
Ul Flammability Rating
UL 94V-0
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Agency/standard
UL, CSA
Ul Rating
Recognized
Ul Voltage Rating (vac)
125
Operating Temperature (°c [°f])
-65 – +105 [-85 – +221]
Applies To
Wire/Cable
Accepts Wire Insulation Diameter, Range (mm [in])
0.71 – 0.87 [0.028 – 0.034]
Application Use
Wire-to-Board
Contact Transmits (typical Application)
Signal (Data)
Packaging Method
Tube
1.
1.1.
1.2.
1.3.
2.
3.
3.1.
3.2.
©2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. Company
All Rights Reserved
TE logo is a trademark.
SCOPE
Content
This specification covers performance, tests and quality requirements for AMP-LATCH* 2 mm ribbon
cable receptacle connector. Insulation displacement contacts terminated to 1 mm centerline ribbon
cable.
Qualification
When tests are performed on the subject product line, procedures specified in Figure 1 shall be used.
All inspections shall be performed using the applicable inspection plan and product drawing.
Qualification Test Results
Successful qualification testing on the subject product line was completed on 24Jun94. The
Qualification Test Report number for this testing is 501-254. This documentation is on file at and
available from Engineering Practices and Standards (EPS).
APPLICABLE DOCUMENTS
The following TE Connectivity (TE) documents form a part of this specification to the extent specified
herein. In the event of conflict between the requirements of this specification and the product drawing,
the product drawing shall take precedence. In the event of conflict between the requirements of this
specification and the referenced documents, this specification shall take precedence.
!
!
!
!
REQUIREMENTS
Design and Construction
Product shall be of the design, construction and physical dimensions specified on the applicable product
drawing.
Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
109-1: Test Specification (General Requirements for Test Specifications)
109 Series: Test Specifications as indicated in Figure 1
114-40038: Application Specification (AMP-LATCH* 2 mm Receptacle Connectors)
501-254: Qualification Test Report (2 mm AMP-LATCH* Ribbon Cable Receptacle Connector)
| Indicates change
*Trademark
Product
Specification
2 mm AMP-LATCH* Ribbon Cable Receptacle Connector
For latest revision, visit our website at www.te.com/documents.
For Regional Customer Service, visit our website at www.te.com
Other products, logos, and company names might be trademarks of their respective owners.
108-1372
11Mar11 Rev C
1 of 6
LOC B

Related parts for 3-111623-1

3-111623-1 Summary of contents

Page 1

... Test Specification (General Requirements for Test Specifications) ! 109 Series: Test Specifications as indicated in Figure 1 ! 114-40038: Application Specification (AMP-LATCH Receptacle Connectors) ! 501-254: Qualification Test Report (2 mm AMP-LATCH* Ribbon Cable Receptacle Connector) 3. REQUIREMENTS 3.1. ...

Page 2

... Test between adjacent contacts of unmated connector assemblies. TE Spec 109-28-3. Test between adjacent contacts of unmated connector assemblies. TE Spec 109-21-5. Subject mated connectors to 23.91 G's rms for 15 minutes. See Figure 5. TE Spec 109-26-7. Subject mated connectors to 50 G's sawtooth shock pulses of 11 milliseconds duration. 3 shocks in ...

Page 3

... TE Spec 109-22. Unless limited by temperature rating of cable used, subject mated connectors to 5 cycles between -65 and 105°C. TE Spec 109-23-3, Condition B. Subject mated connectors to 10 humidity-temperature cycles between 25 and 65°C at 95% RH. TE Spec 109-85-2. Subject mated connectors to environmental Class III for 20 days. ...

Page 4

... Humidity/temperature cycling Mixed flowing gas Temperature life (a) See paragraph 4.1.A. NOTE (b) Numbers indicate sequence in which tests are performed. (c) Precondition samples with 5 durability cycles. Rev C Test Group ( Test Sequence (b) 1,9 1,5 1,5 1,8 3,7 2,4 2,4 3,7 2 3(c) 3(c) Figure 2 108-1372 5 1,5 2 ...

Page 5

... Connector housings and contacts shall be prepared in accordance with applicable Instruction Sheets and shall be selected at random from current production. Test groups shall consist of samples per Figure 3. Test connectors shall be terminated midway along cable with additional outboard connectors applied to facilitate automated data readout per applicable Application Specifications ...

Page 6

... Termination Resistance & Temperature Measurement Points Mounting & Clamping Location For Vibration & Physical Shock Rev C Figure 4 Top View Side View Figure 5 108-1372 ...

Related keywords