3-644038-5 TE Connectivity, 3-644038-5 Datasheet - Page 3
![05P MTA100 CONN ASSY POL 15AU](/photos/41/47/414793/pr06b_sml.jpg)
3-644038-5
Manufacturer Part Number
3-644038-5
Description
05P MTA100 CONN ASSY POL 15AU
Manufacturer
TE Connectivity
Specifications of 3-644038-5
Connector Type
Connector Assembly
Connector Design
Closed End
Product Line
MTA-100
Termination Method To Wire/cable
IDC Standard
Wire Size (mm² [awg])
0.3-0.4² [22]
Mating Connector Lock
With
Four Points Of Contact
Without
Shrouded
No
Mounting Ears
Without
Panel Mount Retention
Without
Voltage Rating (vac)
250
Solder Tail Contact Plating
Tin
Number Of Positions
5
Centerline (mm [in])
2.54 [0.100]
Narrow
No
Post Number(s) Omitted
None
Cable Exit Angle
90°
Contact Type
Socket
Contact Plating, Mating Area, Material
Gold (15) or (15) Total Gold Flash over Palladium Nickel
Contact Base Material
Copper Alloy
Connector Style
Receptacle
Housing Color
Red
Mating Alignment
With
Ul Flammability Rating
UL 94V-2
Housing Material
Nylon
Mating Alignment Type
Polarizing Tab
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Applies To
Wire/Cable
Application Use
Wire-to-Board
Packaging Method
Loose Piece
Vibration, sinusoidal.
Physical shock.
Durability.
Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Mixed flowing gas.
Rev H
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 2.
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
2 pounds maximum average per
contact.
0.8 pound minimum average per
contact.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
TE Spec 109-21-1.
Subject mated samples to 10-55-10
Hz traversed in 1 minute at .06 inch
total excursion. 2 hours in each of 3
mutually perpendicular planes.
TE Spec 109-26-1.
Subject mated samples to 50 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
TE Spec 109-27.
Manually mate and unmate
samples with friction lock header for
25 cycles.
TE Spec 109-42, Condition A.
Measure force necessary to mate
samples with friction lock header
from point of initial contact to depth
of .200 inch at maximum rate of .5
inch per minute.
TE Spec 109-42, Condition A.
Measure force necessary to unmate
samples from friction lock header at
maximum rate of .5 inch per minute.
TE Spec 109-22.
Subject mated samples to 25 cycles
between -55 and 105° C.
AMP Spec 109-23-3, Condition B.
Subject mated samples to 10 cycles
between 25 and 65° C at 95% RH.
AMP Spec 109-43.
Subject mated samples to
temperature life at 85° C for 1000
hours.
AMP Spec 109-85-3.
Subject mated samples to
environmental class III for 20 days.
Procedure
108-1050
3 of 9