3-88859-0 TE Connectivity, 3-88859-0 Datasheet

032 HOUSING FFC RCPT SR 100CL

3-88859-0

Manufacturer Part Number
3-88859-0
Description
032 HOUSING FFC RCPT SR 100CL
Manufacturer
TE Connectivity
Datasheets

Specifications of 3-88859-0

Rohs Compliant
YES
Product Type
Connector
Type Of Connector
Standard
Wire/cable Type
FFC
Mating Connector Lock
With
Mating Connector Lock Type
Detent
Mounting Ears
Without
Color
Black
Flame Retardant
Yes
Panel Mount Retention
Without
Centerline (mm [in])
2.54 [0.100]
Number Of Positions
32
Number Of Rows
Single
Preloaded
No
Accepts Contact Gender
Receptacle
Connector Style
Plug
Mating Alignment
With
Housing Material
Thermoplastic - GF
Ul Flammability Rating
UL 94V-0
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Applies To
Cable
1.
1.1.
1.2.
2.
2.1.
3.
3.1.
3.2.
3.3.
©2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. Company
All Rights Reserved
TE logo is a trademark.
SCOPE
Content
This specification covers perform ance, tests and quality requirem ents for TE Connectivity (TE) contacts
and connectors used with round (discrete) wire and flexible flat conductor (FFC) cables on .100 inch
centerline.
Qualification
W hen tests are perform ed on subject product line, procedures specified in 109 Series Test
Specifications shall be used. All inspections shall be perform ed using applicable inspection plan and
product drawing.
APPLICABLE DOCUM ENTS
The following docum ents form a part of this specification to the extent specified herein. Unless
otherwise specified, latest edition of the docum ent applies. In the event of conflict between
requirem ents of this specification and product drawing, product drawing shall take precedence. In the
event of conflict between requirem ents of this specification and referenced docum ents, this specification
shall take precedence.
TE Docum ents
!
!
!
!
!
!
REQUIREM ENTS
Design and Construction
Product shall be of design, construction and physical dim ensions specified on applicable product
drawing.
Materials
!
!
Ratings
!
!
!
109-1: General Requirem ents for Test Specifications
109 Series: Test Specifications as indicated in Figure 1
108-40002: Product Specification
114-16003: Application Specification
114-16015: Application Specification
501-131: Test Report
Contact: Phosphor bronze
Housing: Therm oplastic, flam e retardant, black, UL94V-0
Voltage: 300 volts AC rm s
Current: Signal applications only, 2 am peres single circuit, FFC (.003 x .050 conductor)
Tem perature: -65 to 105°C
| Indicates change
*Trademark
Product
Specification
Flexible Flat Conductor (FFC) Cables on .100 Inch Centerline
For latest revision, visit our website at www.te.com/documents.
For Regional Customer Service, visit our website at www.te.com
Other products, logos, and company names might be trademarks of their respective owners.
108-9024
11Mar11 Rev L
1 of 7
LOC B

Related parts for 3-88859-0

3-88859-0 Summary of contents

Page 1

... Housing: Therm oplastic, flam e retardant, black, UL94V-0 3.3. Ratings ! Voltage: 300 volts Current: Signal applications only peres single circuit, FFC (.003 x .050 conductor) ! Tem perature: -65 to 105°C ©2011 Tyco Electronics Corporation, | Indicates change a TE Connectivity Ltd. Company *Trademark All Rights Reserved TE logo is a trademark ...

Page 2

... See Note (a). No discontinuities greater than 1 m icrosecond. See Note (a). 15 ounces m axim um per contact, standard pressure. 36 ounces m axim um per contact, high pressure. 20 ounces m axim um per contact, PCB edge connector. 108-9024 Procedure Visual, dim ensional and functional per applicable quality inspection plan ...

Page 3

... Shall m eet visual requirem ents, show no physical dam age and shall m eet requirem ents of additional tests as specified in Test Sequence in Figure 2. Rev L Requirem ent 1.5 ounces m inim um per contact, standard pressure. 3 ounces m inim um per contact, high pressure. 1.5 ounces m axim um per contact, PCB edge connector. Contacts shall not dislodge from norm al locking position in housing. ...

Page 4

... Test Group 2 shall consist of 5 sam ples of standard pressure receptacle with 15 m icroinch gold plating and 5 sam ples with 100 m icroinch tin plating. Test Group 3 shall consist of 5 sam ples each of standard and high pressure receptacles with 15 and 30 m icroinch gold plating and standard pressure receptacle with 50 m icroinch gold plating. ...

Page 5

... Applicable AMP quality inspection plan will specify sam pling acceptable quality level to be used. Dim ensional and functional requirem ents shall be in accordance with applicable product drawing and this specification. Term ination Resistance Measurem ent Points (Connector to AMPMODU connector assem bly) Rev L Figure 3 108-9024 ...

Page 6

Term ination Resistance Measurem ent Points Term ination Resistance Measurem ent Points Rev L Figure 4 (Connector to connector assem bly) Figure 5 (Connector to printed circuit board) 108-9024 ...

Page 7

Vibration and Physical Shock Mounting Fixture Rev L Figure 6 108-9024 ...

Related keywords