406372-5 TE Connectivity, 406372-5 Datasheet - Page 6

• Manufacturer Part Number: 406372-5
• Description: 110 MJ ASSY,RJ45,UNIV,CAT5
• Manufacturer: TE Connectivity
• Series: 110Connectr

Specifications of 406372-5

• Product Type: Connector - Modular
• Jack Type: RJ45
• Wiring Pattern: Universal
• Termination Style: 110 Style Punch-Down
• Keyed: No
• Performance Category: Cat 5e
• Stuffer Cap Material: Polyphenylene Oxide
• Stuffer Cap Color: Gray
• Shielded: No
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Number Of Positions: 8
• Netconnect Select System: Yes
• Conductor O.d. (mm [in]): 1.27 [0.050]
• Mount Type: Panel Mount
• Wire Range (solid) (mm [awg]): 22-26
• Wire Range (stranded) (mm² [awg]): 22-26
• 110 Block Material: Polycarbonate
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold
• Contact Plating, Mating Area, Thickness (µm [?in]): 1.27 [50]
• Housing Color: Orange
• Housing Material: Polyphenylene Oxide
• Ul Flammability Rating: UL 94V-0
• Dust Cover: Without
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C
• Rohs/elv Compliance History: Converted to comply with RoHS directive
• Packaging Method: Poly Bag
• Packaging Quantity: 1

4.3.
4.4.
Rev B
NOTE
Acceptance
Acceptance is based upon verification that product meets requirements of Figure 1. Failures attributed
to equipment, test setup or operator deficiencies shall not disqualify product. When product failure
occurs, corrective action shall be taken and samples resubmitted for qualification. Testing to confirm
corrective action is required prior to resubmittal.
Quality Conformance Inspection
The applicable quality inspection plan will specify acceptable quality sampling level to be used.
Dimensional and functional requirements shall be in accordance with applicable product drawing and
this specification.
(a) Termination resistance of this assembly consists of the following: Plug to jack contact
(b) Millivolt drop (resistance) due to 6 inch and 2 inch wire lengths shall be subtracted from all
resistance plus printed circuit board trace plus 110 block to discrete wire contact resistance.
Printed circuit board trace length varies with each jack position, therefore, significant
variations in termination resistance readings can be expected within each jack assembly.
readings.
Termination Resistance Measurement Points
Figure 3
108-1389
6 of 6