487769-1 TE Connectivity, 487769-1 Datasheet - Page 3

• Manufacturer Part Number: 487769-1
• Description: 003 HOUSING FFC RCPT 100CL SR
• Manufacturer: TE Connectivity

Specifications of 487769-1

• Rohs Compliant: YES
• Product Type: Connector
• Type Of Connector: Slimline
• Wire/cable Type: FFC
• Mating Connector Lock: With
• Mating Connector Lock Type: Detent
• Mounting Ears: Without
• Flame Retardant: Yes
• Panel Mount Retention: Without
• Centerline (mm [in]): 2.54 [0.100]
• Number Of Positions: 3
• Number Of Rows: Single
• Preloaded: No
• Accepts Contact Gender: Receptacle
• Connector Style: Plug
• Mating Alignment: Without
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Cable

(a)
Connector unm ating force.
Contact retention.
Crim p tensile.
Durability.
Solderability.
Therm al shock.
Hum idity-tem perature cycling.
Mixed flowing gas.
Tem perature life.
Rev L
Shall m eet visual requirem ents, show no physical dam age and shall m eet requirem ents of additional
tests as specified in Test Sequence in Figure 2.
Test Description
1.5 ounces m inim um per contact,
standard pressure.
3 ounces m inim um per contact,
high pressure.
1.5 ounces m axim um per contact,
PCB edge connector.
Contacts shall not dislodge from
norm al locking position in housing.
W ire Size Crim p Tensile
See Note (a).
Solderable area shall have
m inim um of 95% solder coverage.
See Note (a).
See Note (a).
See Note (a).
See Note (a).
AW G
FFC
22
24
26
28
30
32
ENVIRONMENTAL
Figure 1 (cont)
Figure 1 (end)
Lbs Minim um
11.0
Requirem ent
7.0
4.0
2.7
1.0
0.7
5.0
Subject m ated connectors to 10
Measure force necessary to unm ate
connector assem blies with locking
latches rem oved or released at rate
of .5 inch per m inute.
AMP Spec 109-42,
Condition A.
Apply axial load of 3 pounds to
contacts.
AMP Spec 109-30.
Determ ine crim p tensile at rate of 1
inch per m inute.
AMP Spec 109-16.
Mate and unm ate connector
assem blies for 100 cycles for 30
ìin gold, 50 cycles for 15 ìin gold,
and 50 cycles for 100 ìin tin at
m axim um rate of 150 cycles per
hour.
AMP Spec 109-27.
Subject contacts to solderability.
AMP Spec 109-11-1.
Subject m ated connectors to 5
cycles between -65 and 105 C.
AMP Spec 109-22.
hum idity-tem perature cycles
between 25 and 65 C at 95% RH.
AMP Spec 109-23-4,
Condition B.
Subject m ated connectors to
environm ental class III for 20 days.
AMP Spec 109-85-3.
Subject m ated connectors to
tem perature life at 105 C for 500
hours.
AMP Spec 109-43.
Procedure
108-9024
3 of 7