5-1479184-1 TE Connectivity, 5-1479184-1 Datasheet - Page 4

• Manufacturer Part Number: 5-1479184-1
• Description: KIT,8P,MOD PLUG,STRANDED,CAT6
• Manufacturer: TE Connectivity

Specifications of 5-1479184-1

• Product Type: Connector
• Number Of Contacts Loaded: 8
• Cable Style: Round Stranded
• Performance Category: Cat 6
• Latch Style: Standard
• Keyed: No
• Small Conductor: No
• Qty./box: 1000
• Shield Material: Brass
• Shielded: Yes
• Solder Tail Contact Plating: Gold Flash over Nickel
• Number Of Positions: 8
• Conductor O.d. (mm [in]): 0.89 – 1.00 [0.035 – 0.040]
• Cable Jacket Outer Diameter Range (mm [in]): 6.00 – 7.00 [0.236 – 0.280]
• Shield Plating: Nickel
• Preloaded: Yes
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (50)
• Connector Style: Plug - Modular
• Housing Material: Polycarbonate GF
• Ul Flammability Rating: UL 94V-2
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Box

Term ination tensile strength,
horizontal, IDC-wire interface.
Term ination tensile strength,
vertical, IDC-wire interface.
Durability repeated, IDC-wire
interface.
Therm al shock, IDC-wire interface.
Therm al shock, jack-plug interface. See Note.
Hum idity/tem perature cycling, IDC-
wire interface.
Hum idity, steady state, jack-plug
interface.
Stress relaxation, IDC-wire
interface.
Rev K
Test Description
See Note.
See Note.
See Note.
See Note.
See Note.
24 Stranded
26 Stranded
24 Stranded
26 Stranded
W ire Size
W ire Size
22 Solid
23 Solid
24 Solid
22 Solid
23 Solid
24 Solid
AW G
AW G
Figure 1 (continued)
ENVIRONMENTAL
Requirem ent
Minim um
Minim um
Pounds
Pounds
1.5
7.5
4.6
1.5
1.9
14
12
9.5
1
1
EIA 364-8.
Determ ine slot tensile strength. Pull
parallel to term inated wire.
See Figure 4.
EIA 364-8.
Determ ine slot tensile strength. Pull
perpendicular to term inated wire.
See Figure 5.
TIA/EIA 568-B.2.
Term inate and re-term inate IDC’s
on jack for 200 cycles with 22 AW G
solid wire using im pact tool PN
569994-1 set on low im pact setting.
IEC 60068-2-14.
Subject m ated plug and term inated
jack to 100 cycles between -40 and
70°C. Duration exposure shall be 30
m inutes with an average transition
rate of 3°C per m inute.
IEC 60512-11-9.
Subject m ated plug and term inated
jack to 25 cycles between –40 and
70°C.
IEC 60068-2-38.
Subject m ated plug and term inated
jack to 21 cycles (cycle tim e 24
hours) between 25 and 65°C at
93% RH with a -10°C sub-cycle
shock.
IEC 60512-11-12.
Subject m ated plug and term inated
jack to 55°C and 95% RH for 10
days.
IEC 60068-2-2, Test Method Ba.
Subject m ated plug and term inated
jack to 70°C for 500 hours.
Procedure
108-1990
4 of 8