5-641218-1 TE Connectivity, 5-641218-1 Datasheet - Page 4

• Manufacturer Part Number: 5-641218-1
• Description: 21P MTA156 CONN ASSY 20AWG LF
• Manufacturer: TE Connectivity

Specifications of 5-641218-1

• Connector Type: Connector Assembly
• Connector Design: Closed End
• Product Line: MTA-156
• Termination Method To Wire/cable: IDC Standard
• Wire Size (mm² [awg]): 0.5-0.6² [20]
• Mating Connector Lock: With
• Four Points Of Contact: Without
• Shrouded: No
• Mounting Ears: Without
• Mating Connector Lock Type: Locking Ramp
• Panel Mount Retention: Without
• Current Rating (a): 7
• Voltage Rating (vac): 600
• Solder Tail Contact Plating: Tin
• Number Of Positions: 21
• Centerline (mm [in]): 3.96 [0.156]
• Narrow: No
• Post Number(s) Omitted: None
• Cable Exit Angle: 90°
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Gold (30) or (30) Total Gold Flash over Palladium Nickel
• Contact Base Material: Copper Alloy
• Connector Style: Receptacle
• Housing Color: Yellow
• Mating Alignment: Without
• Ul Flammability Rating: UL 94V-2
• Housing Material: Nylon
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Application Use: Wire-to-Board

Humidity/temperature cycling.
Temperature life.
Mixed flowing gas.
Rev J
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 2.
See Note.
See Note.
See Note.
Figure 1 (end)
Requirement
TE Spec 109-23-3,
Condition B.
Subject mated samples to 10 cycles
between 25 and 65° C at 95% RH.
TE Spec 109-43.
Subject mated samples to
temperature life at 105° C for gold
plated contacts and 85° C for tin
plated contacts for 1000 hours.
TE Spec 109-85-3.
Subject mated samples to
environmental class III for 20 days.
Procedure
108-1051
4 of 10