583649-3 TE Connectivity, 583649-3 Datasheet - Page 3

• Manufacturer Part Number: 583649-3
• Description: CONT.CRP.SNAP TW.LF.STRIP
• Manufacturer: TE Connectivity

Specifications of 583649-3

• Rohs Compliant: NO
• Product Type: Contact
• Termination Method To Wire/cable: Crimp
• Wire Insulation Diameter (mm [in]): 1.14 – 2.41 [0.045 – 0.095]
• Color Code: Violet
• Contact Retention In Housing: Crimp Snap-In
• Solder Tail Contact Plating: Nickel (30)
• Centerline (mm [in]): 3.18 [0.125], 3.96 [0.156]
• Wire Range (mm [awg]): 0.30-0.90² [22-18]
• Contact Configuration: Bifurcated
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Phosphor Bronze
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Contact Packaging Method: Strip Form

Mating Force
Contact Retention
(Crimped Contacts)
Contact Engaging Force
Contact Separating
Force
Crimp Tensile
Durability
Thermal Shock
Humidity, Steady State
Rev D
12 ounces maximum per
contact pair.
Contacts shall not dislodge
from normal locking position.
10 ounces maximum per contact.
.7 ounces minimum.
No physical damage.
No physical damage.
1000 megohms final, insulation
resistance.
AWG
Wire
Size
28
26
24
22
20
18
16
ENVIRONMENTAL
Figure 1 (end)
Crimp Tensile
Minimum
Pounds
12.0
20.0
30.0
42.0
3.0
5.0
8.0
Measure force necessary to mate
connector assembly from point of
initial contact, incorporating free
floating fixtures at a rate of 0.5
inch/minute; Test Specification
109-42, cond A, calculate force per
contact pair.
Apply axial load of 8 pounds to
contact lead; Test Specification
109-30.
Measure force to engage using
gage 1, see Figure 7; Test
Specification 109-35.
Size 3 times using gage 1, see
Figure 7, insert gage 2 and
measure force to separate; Test
Specification 109-35.
Determine crimp tensile
at a rate of 1inch/
minute; Test Specification 109-16.
Mate and unmate connector
assemblies with 30 microinches
gold for 250 cycles with gage 1.
see Figure 7; Test Specification
Spec 109-27.
Subject mated connectors to 5
cycles between -55° and 105° C;
Test Specification 109-22.
Subject unmated insulation
resistance. connectors to steady
state humidity at 40° C and 90-95%
RH; Test Specification 109-23,
method II, cond
108-9031
3 of 8