66109-1 TE Connectivity, 66109-1 Datasheet - Page 5

• Manufacturer Part Number: 66109-1
• Description: III+ SKT,26-24,30AU
• Manufacturer: TE Connectivity
• Series: Type III+r

Specifications of 66109-1

• Rohs Compliant: YES
• Product Type: Contacts
• Contact Gender: Socket (Female)
• Current Rating: 13 A
• Number Of Positions / Contacts: 1
• Mounting Style: Snap In
• Termination Style: Crimp
• Contact Plating: Gold over Nickel
• Contact Material: Brass
• Wire Gauge Range: 26-24
• Insulation Support: Yes
• Termination Method To Wire/cable: Crimp
• Wire/cable Type: Discrete Wire
• Grade: Commercial
• High Current: No
• Termination End Plating: Gold
• Pin Diameter (mm [in]): 1.57 [0.062]
• Wire Range (mm [awg]): 0.12-0.24² [26-24]
• Spring Material: Stainless Steel
• Used With: G Series Connectors, M Series Connectors, CPC Connectors
• Contact Type: Socket
• Contact Classification: Signal
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Brass
• Contact Size: 16
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.89 – 1.40 [0.035 – 0.055]
• Applies To: Wire/Cable
• Test Current (a): 13.0
• Packaging Method: Loose Piece
• Packaging Quantity: 1,000 Box/Carton
• Lead Free Status / Rohs Status: Details

4.
4.1.
4.2.
Rev E
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
C.
Quality Conform ance Inspection
The applicable inspection plan will specify the sam pling acceptable quality level to be used. Dim ensional
and functional requirem ents shall be in accordance with the applicable product drawing and this
specification.
Sam ple Selection
Contacts shall be prepared in accordance with applicable Instruction Sheets. They shall be
selected at random from current production. All test groups shall consist of 10 sam ples of each
part num ber (pin and socket). One-half of the sam ples shall be crim ped to m axim um gauge wire
and the other half crim ped to m inim um gauge wire. All wire lengths shall be a m inim um of 12
inches.
!
!
Test Sequence
Qualification inspection shall be verified by testing sam ples as specified in Figure 2.
Acceptance
!
!
Precious m etal plated contacts shall be crim ped to wire conform ing to MIL-W -16878/4, Type
E.
Tin plated contacts shall be crim ped to wire conform ing to MIL-W -16878/1, Type B.
All sam ples tested in accordance with this specification shall m eet the stated tolerance lim it.
Failures attributed to equipm ent, test setup, or operator deficiencies shall not disqualify the
product. W hen product failure occurs, corrective action shall be taken and sam ples
resubm itted for qualification.
108-10042
5 of 7